98.4” New Femco CNC Vertical Lathe Model VL-25

Description

98.4” New Femco CNC Vertical Lathe Model VL-25 Specifications:

The 98.4” New Femco CNC Vertical Lathe Model VL-25 has a powerful 60 HP Spindle Motor driven turn table with a Manual Independent 4 Jaw Chuck for workpiece holding. It has a robust Servo Motor Driven Ram for vertical Z-Axis machining, and a heavy-duty Carriage, for carrying the ram along the horizontal X-Axis along a uniquely adjustable Crossrail. The Crossrail can be positioned automatically up and down to a desired level upon the double columns.

The Turn Table Drive consists of a 50/60 HP AC spindle motor and a gearbox which provides 2 speed ranges (1.6 rpm 160 rpm). The turntable sits on a Timken tapered roller bearing inside the bed.

The VL-25 Tool Holders have ISO #50 taper shanks, and the ram has a #50 ISO taper receptacle with two hydraulically rotated cams to pull the shank tight.

An Automatic Tool Changer allows programmable tool changes. A carousel type magazine attached to the end of the cross rail keeps 8 toolholders thus allowing for rapid tool changes.

The Rigid Surface Hardened and Ground Ram moves up and down via servomotor actuated ball nut against a fixed screw. The square sectioned ram slides inside Turcite lined narrow guide of the ram carriage. This design allows easy boring of relatively small diameter but deep holes.

The Horizontal Traverse of the Ram Carriage is actuated by a rotating ball screw with servo motor attached to the edge of the cross rail..

The Crossrail is of sufficient rigidity against the weight of the ram and ram carriage and the thrust from machining. The Cross rail is program elevated and descended to the desired height then clamped tight against the double columns. Leveling of the Cross rail is achieved by having two precision ground 100 mm pitched hook up racks attached to the double columns. The relative height level of these two racks can be manually adjusted when necessary.

The Double Columns which support the Crossrail are fixed to the bed (of the turntable) at the bottom ends and are linked to each other at the top ends. Both the ram and the ram carriage use (Glass) digital scales for optimum positioning accuracy.

All Servo Motors and the Spindle Motor, Tool Changing and Crossrail elevation etc. are all controlled with FANUC OiT Controller having all push buttons and display provided on a pendant. The pulse generator can be detached from the pendant so that an operator can take only the pulse generator with him when he has to reach close to or inside a workpiece when manual inching of cutting tool position is necessary.

There are two kinds of lubrication supporting this machine. One is the Continuous Lubrication System for the gearbox of rotating table and bearings for the gearbox. The other is the automatic Interval Lubrication System for all the slide ways.

98.4” New Femco CNC Vertical Lathe Model VL-25:

• Simultaneously Controllable Axes: 2
• Minimum Programmable Increment:0. 0001
• Program Storage Length 1500 ft. (40m)
• Registered Programs: 63
• Backlash Compensation
• Constant Surface Speed Control
• Self Diagnostic Functions

• Background Editing
• Tool Nose Radius Compensation (G70-42)
• Combined Absolute/Incremental Commands
• Inch / Metric Programming
• Multiple Repetitive Cycles (G70-76)
• Canned Cycles (G90, G92-G76)
• Reference Point Return (G27-G30)
• Sub Programming

• High Resolution 9” Monochrome CRT
• Geometry and Wear Offsets
• 16 pairs of Tool Offsets
• Run Hour Display
• Thread Cutting Retract
• Automatic Tool Offset Calculation
• Direct Input of Offset Value Measured
• Input / Output Interface (RS232C)
• Machine Lock Key Switch
• Incremental Offset
• Rapid Traverse Override
• Feed Rate Override
• Spindle Speed Override
• Manual Pulse Generator
• Tape Code: EIA, ISO Automatic Recognition
• Optional Block Skip
• Canned Cycles for Turning
• Mirror Image
• Manual Continuous Feed
• Dry Run
• Single Block
• Clock Function

• Coolant Supply and Recirculation System
• 6 Tool Holders 
• Automatic Slideway Lubrication System
• Cross Rail Slideway Telescope Cover
• 4 Jaw Manual Chuck (Mutually Independent)
• Splash Guard
• Glass Linear Scales (for X Axis and Z Axis) for Position Feed Back to Servo System.
• Lamp
• 1 Set of Hand Tools for Maintenance
• FANUC OiT with Detachable Manual Pulse Generator
• Bed Leveling and Fastening Parts
• Necessary Operation and Maintenance Documentation 

Options:

Additional Tool Holders… $5,000.00
ATC Carrousel 8 tool Positions… Included
Chip Conveyor… $4,000.00

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on Twitter, Facebook, Youtube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/