25′ x 47.2″ New Amada Band Saw Machine Model TVM7616

Amada Band Saw Machine TVM7616 accessories, specifications and features:

SKU: 12360 Categories: ,

Description

25′ x 47.2″ New Amada Band Saw Machine Model TVM7616 Specifications:

Cutting Capacity (L x H) 25′ x 47.2″
Throat Depth 63″
Work Load Capacity 88200 lbs.
Saw Head Travel Stroke 300″
Saw Blade Dimensions (L x T x W) 35’0″ x 0.063″ x 2-5/8″
Blade Speed 40-230 ft./min, Inverter
Saw Blade Motor 15 HP
Hydraulic Pump Motor 5 HP
Cutting Fluid Pump Motor 0.5 HP
Voltage Required

AC220V±10%, 3 PH, 60 Hz

All Other Voltages Require a Transformer.

Machine Dimensions 204.5″ x 393.7″ x 194.5″ (W x L x H)
Table Height 70.0″
Machine Weight 79380 lbs.
  • Drive Wheel Transmission
    The drive motor’s variable speed driven pulley is directly coupled to the high efficiency planetary gear reducer and the drive wheel is mounted on the rotating output case of the gear reducer. The pulleys and belt are guarded from both fluids and dust for long life with low maintenance.
  • Band Wheels & Drive System
    The band wheels are cast iron for long, productive life. The drive wheel is mounted on the rotating outer case of the planetary gear reducer. This direct coupling of the drive wheel to the rotating outer case of the reducer provides deflection free torque transfer and ensures the wheel runs true regardless of tension stresses or cutting loads. The inherent high efficiency of the planetary gear reducer means more power is delivered to the blade. The idler wheel spindle assembly incorporates tapered roller bearings for greater rigidity and long service life. The wheel tracks the blade so that the back of the blade contacts the wheel flange to support the back of the band.
  • Band Deviation Monitor
    The detector constantly displays the current blade cutting conditions and has independently adjustable limits for each direction. If the blade deviation exceeds either limit for more than 90 seconds, the machine control will stop the machine. Using the cutting display in conjunction with the runout detector, enables the operator optimize the cutting performance to achieve the desired rate and accuracy.
  • Power Positioning of Upper Saw Guide Arm
    The movable guide is hydraulically positioned using the manual valve on the control panel. After it is in the desired position, it is locked to the way bar by a short stroke hydraulic cylinder.
  • Pressure/Flow Feed Control
    The independent pressure and flow controls in series ensure the optimum cutting rate can be obtained regardless of section or alloy being cut. The pressure control determines the cutting force applied to the blade and the flow control sets the maximum feed rate of the head. For example for difficult to machine materials the pressure is set higher than free machining alloys and the flow is set lower, as shown on the escutcheons above the above the control knobs.
  • Table Guiding
    The rigid feed table is mounted on precision LM linear bearings. This rigidity enables the machine to cut all tough and hard machinable alloys.
  • Manual Positioning of Saw Table
    The table positioning push buttons actuate solenoid valves to rapidly position the saw head forward or reverse. The manual movement of the head is controlled by push buttons on the control panel with safety interlocks.
  • Idler Wheel Motion detector
    The idler wheel motion detector will turn off the blade drive in the case where a blade breaks or is jammed in the work piece. This feature prevents premature wear on the drive wheel from a stalled band.
  • Ammeter
    The ammeter displays the current draw on the blade drive motor.

25′ x 47.2″ New Amada Band Saw Machine Model TVM7616 Standard Features:

  • NC Programmable Control
  • Blade Deviation Monitor
  • Chip Conveyor
  • Motion Detector
  • TVM7616 MachineVariable Blade Speed

25′ x 47.2″ New Amada Band Saw Machine Model TVM7616 Machine Warranty:

Included with the machine is a one (1) year warranty, covering labor and parts where required due to defects in material or workmanship. All parts and labor will be supplied by Amada Machine Tools America, Inc. or authorized representative.

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouse and office is located just minutes north of Columbus, Ohio. With over 25 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service support and technical expertise on all new and used machine tools to meet their needs.

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or fill out the Request A Quote form on the right side of this page.

Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.

Terms: Check With Order

F.O.B Factory

Check us out on Twitter, Facebook, Youtube, LinkedIn and Instagram

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.