Description
13″ x 25″ New Clausing Colchester Lathe Geared Head 1 Phase Model 8026J1 For Sale
The new Clausing Lathe is the industry standard for conventional lathes. The quality built into every Clausing lathe translates into real long-term performance in your application. Rugged construction, consistent quality in design and production and the “human engineering” which makes the operator more efficient, all make this lathe a cost-effective investment.
13″ x 25″ New Clausing Colchester Lathe Geared Head 1 Phase Model 8026J1 Specifications:
| Capacity | |
| Height of Center | 6.5” |
| Swing over Bed | 13″ |
| Swing in Gap | 18.8” |
| Width in Front of Faceplate | 4.5” |
| Swing over Cross Slide | 8.26” |
| Bedway Width | 8” |
| Headstock | |
| Spindle Bore | 1.5” |
| Spindle Nose (camlock) | D1-4 |
| Spindle Nose Taper | 3MT |
| Number of Spindle Speeds | 12 |
| Spindle Speed Range (rpm) | 40-2500 |
| Cross/Top Slide | |
| Travel of Cross Slide | 7.5″ |
| Width of Cross Slide | 5.5” |
| Travel of Top Slide | 3.63” |
| Width of Top Side | 3.25” |
| Tailstock | |
| Quill Travel | 4.38” |
| Quill Diameter | 1.63” |
| Quill Taper | 3MT |
| Feeds & Threading | |
| Longitudinal Feed Range (16) | 0.001″ – 0.080″ in/rev |
| Cross Feed Range (8) | 0.0005″ – 0.040″ in/rev |
| Number of Inch Pitches | 35 |
| Range of Inch Pitches | 2-56 TPI |
| Number of Metric Pitches | 39 |
| Range of Metric Pitches | 0.2-14mm |
| Number of Diametral Pitches | 18 |
| Range of Diametral Pitches | 8-56 DP |
| Number of Module Pitches | 18 |
| Range of Module Pitches | 0.3-3.5 MOD |
| Spindle Motor | 3 hp |
| 8026JI Dimensions | |
| Geared Head Gap | 13″ x 25″ |
| Length x Height x Width | 67″ x 58″ x 37″ |
| Weight | 1,680 lbs |
13″ x 25″ New Clausing Colchester Lathe Geared Head 1 Phase Model 8026J1 Features:
- Headstock: The rugged headstock is designed to provide maximum power for roughing cuts, and smooth, quiet power for fine finishing. The 12 all-geared speeds, from 40 to 2500 rpm, handle a wide variety of work at top efficiency. All headstock gears are hardened and ground, and headstock shafts are splined and turn on anti-friction bearings. Increased mass and rigidity of the headstock mean much less transmission noise, and less deflection than previous models. Spindle bearings, gears, shafts, and headstock clutches are lubricated by a pumped bath of oil.
- Universal Gear Box: A broad range of Feed and Thread selections is available by using three selector levers and an 8-position rotary dial. Feed selections automatically disengage the leadscrew drive and independent torque-limiting clutches give accidental overload protection on both the leadscrew and spline shaft. All gears are hardened, and shafts turn on anti-friction bearings.
- Bed and Base: The sturdy bed is manufactured from close-grained cast iron, which is induction hardened and ground. The combined vee and flat configuration gives optimum kinematic guiding of the slideways…allowing both precise, accurate machining, and vibration-free cutting. The control base is rigidly constructed, and incorporates a readily accessible coolant tank mounted at the rear of the machine.
- Apron, Saddle, and Slides: For optimum precision, the cross slide runs along a dovetail guide, and both saddle and cross slide are provided with adjustable gib strips. For heavy cutting, either the saddle or cross slide can be locked, and anti-backlash adjustment is provided on the cross slide nut. Bed wipers and an apron mounted one-shot lubrication pump are provided as standard. The cast iron apron is totally enclosed and splash bath lubricated. A double halfnut assembly is provided for maximum life and screwcutting accuracy. The drop-out worm feed control is mechanically interlocked to prevent simultaneous half-nut and spline shaft engagement.
- 24V Control: The machine controls are 24V for low voltage requirements.
13″ x 25″ New Clausing Colchester Lathe Geared Head 1 Phase Model 8026J1 Standard Equipment:
- Center Bushing
- Two MT Dead Centers
- Inch Threading Dial
- Accuracy Chart
- Parts and Instruction Manuals
- Splash Guard
- Coolant System
- Set of Wrenches and Keys
- 208/230 or 460 volts, 3 phase, 60 hz (must specify voltage) (other voltages may require a transformer)
13″ x 25″ New Clausing Colchester Lathe Geared Head 3 Phase Model 8026J1 Optional Accessories:
| 3-521 10″ Telescopic Taper Attachment | $2,815.00 |
| 3-400 10″ Slotted Face Plate | $695.00 |
| 3-500 12″ Slotted Face Plate (includes special chuck guard) | $1,355.00 |
| 3-502 18″ Slotted Face Plate (includes special chuck guard) | $2,025.00 |
| 12-510 Live Center | $440.00 |
| 13-600VS Drive Plates | $800.00 |
| 3-513 Bronze Tip & Roller Steady Rest .39” to 4” | $735.00 |
| 3-514 Bronze Tip & Roller Follower Rest .39” to 3” | $425.00 |
| PB23-D4 5C Ft. Mount Handwheel Collet Chuck | $1,530.00 |
| 0123-R-(state size) Individual 5C Round Collet Inch | $30.00 |
| 0123-R-(state size) Individual 5C Round Collet Metric | $30.00 |
| 0123-SET-4 1/16″ – 1-1/16″ by 64ths (inch set) | $1,850.00 |
| 0123-SET-5 1/16″ – 1-1/16″ by 32nds (inch set) | $960.00 |
| 0123-SET-6 1/16″ – 1-1/16″ by 16ths (inch set) | $500.00 |
| 0123-SET-7 1/8″ – 1″ by 8ths (inch set) | $235.00 |
| 0123-SET-1 3mm-27mm by .5mm (metric set) | $1,400.00 |
| 0123-SET-2 3mm-27mm by 1mm (metric set) | $725.00 |
| 7659 18pc 5C Collet Rack | $55.00 |
| 3-503A Aloris Quick Change Tool Post w/4 Holders (BXA) | $970.00 |
| 3-503A-1 Aloris Extra Standard Straight Holder 5/8” (BXA) | $110.00 |
| 3-503A-1S Aloris Standard Straight Holder 3/4” (BXA) | $150.00 |
| 3-503A-2 Aloris Extra V-Holder 5/8”, 1/2” bore bar (BXA) | $120.00 |
| 3-503A-2S Aloris Extra V-Holder 3/4”, 5/8″ bore bar (BXA) | $160.00 |
| 3-503A-4 Aloris 1” Heavy Duty Boring Bar Holder (BXA) | $205.00 |
| 3-503A-4D Aloris 1” Boring Bar Holder (BXA) | $165.00 |
| 3-503A-41D Aloris 1-1/4” Boring Bar Holder (BXA) | $185.00 |
| 3-503A-5 Aloris Extra 2MT Holder (BXA) | $155.00 |
| 3-503A-53 Aloris Extra 3MT Holder (BXA) | $195.00 |
| 3-503A-10 Aloris Knurl Holder with Med. Diamond Inserts | $225.00 |
| 3-503A-10AMS Aloris Straight Knurl Inserts 25 TPI (each) 3-503A-10 | $50.00 |
| 3-503A-71 Aloris Cutoff Holder 1.5” height (BXA) | $310.00 |
| 3-503A-BSL125 Aloris Cutoff Blades Self-Locking 1/8″ wide (BXA) | $105.00 |
| 3-518 Five-Position Carriage Stop – Requires One Position or Micro Carriage Stop (Sold Separately) | $765.00 |
| 3-516 One-Position Carriage Stop | $520.00 |
| 3-517 Micro Position Carriage Stop | $535.00 |
| 13-AVPGH Set of 4 Anti- Vibration Pads | $670.00 |
| 0625321 6″ 3-Jaw Setrite Universal Scroll Chuck | $1,565.00 |
| 0825321 8″ 3-Jaw Setrite Universal Scroll Chuck | $1,785.00 |
| 0626321 6″ 6-Jaw Setrite Universal Scroll Chuck | $2,235.00 |
| 0826321 8″ 6-Jaw Setrite Universal Scroll Chuck | $2,690.00 |
| 0814421 8″ 4-Jaw Independent Chuck | $1,465.00 |
| 1014421 10″ 4-Jaw Independent Chuck | $1,700.00 |
| 1897 Drill Chuck for Tailstock | $165.00 |
| 1898 3MT to 3JT Arbor for 1897 | $25.00 |
| DRO for 13″ x 25″ MACHINES | |
| AR10M28100T 2 Axis Acu-Rite 100 DRO | $2,585.00 |
| AR10M28200T 2 Axis Acu-Rite 200 DRO | $2,815.00 |
| AR10M28300T 2 Axis Acu-Rite 300 DRO | $3,295.00 |
| AR10M28300TTHD 2 Axis Acu-Rite 300 DRO w/Thread Assist | $4,325.00 |
| FG1028-PKC 2 Axis Fagor Color DRO | $2,815.00 |
| FG1028-PK 2 Axis Fagor LED DRO | $2,585.00 |
| NW1026NMS800 2 Axis Newall NMS800 LED DRO | $3,100.00 |
Clausing Colchester Warranty:
Clausing warranties the machine and control for a period of one year from the date of installation. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
