Description
20” x 25” Amada Vertical Tilt-Frame Band Saw Model VT5063SW (2150APC) Automatic Specifications:
| Cutting Capacity | |
| Round 0° (diameter) |
20″
|
| Round at 45° (diameter) |
17″
|
| Round at 60° (diameter) |
11.25″
|
| Rectangle at 0° (W x H) |
20″ x 25″
|
| Rectangle at 45° right (W x H) |
20″ x 17″
|
| Rectangle at 60° right (W x H) |
20″ x 11.25″
|
| Maximum vise opening |
20.25″
|
| Work load capacity |
8,000 lbs
|
| Saw Blade |
|
| Blade size (L x T x W) |
18’2″ x 0.050″ x 1-1/2″
|
| Blade speed |
30-500ft/min by Inverter
|
| Tension control |
Hydraulic
|
| Blade Control |
|
| Cutting control |
Direct Force Sensing Electric Ball Screw with PC3 Programmable Control
|
| Blade feed force |
0 to 300 lbs
|
| Vise Operation |
|
| Type |
Main Vise (Optional second vise is available to install)
|
| Control |
Hydraulic, Full Stroking with 9-12″ High x 15″ Wide 60° Faceplates
|
| Motors |
|
| Saw blade |
10 HP
|
| Hydraulic pump |
5 HP
|
| Cutting fluid pump |
1/8 HP
|
| Tilt gear |
1/15 HP
|
| Power Requirement |
|
| Power supply voltage |
AC230V +- 10% or AC460V +- 10%
3PH, 60 Hz, voltage must be specified when ordering |
| Power requirement |
|
| Cutting Fluid |
|
| Tank capacity |
60 gal
|
| Pump type |
Electric
|
| Hydraulic |
|
| Tank capacity |
10 gal
|
| Chip disposal |
Manual
|
| Standard Feed Vise |
|
| Index mechanism |
Shuttle vise
|
| Material Index |
AC Servo Motor and Ball Screw
|
| Feed Stroke |
48″
|
| Remnant Length |
23″ plus length of parts
|
| Optional Shuttle Table |
|
| Feed mechanism |
Automatic Servo Drive Index with Linear Guide System
|
| Feed stroke |
8, 13 and 18ft (must be specified when ordering)
|
| Machine dimensions (W x L x H) |
94.7″ x 99.2″ x 90.8″
|
| Table Height (Above Floor) |
40″
|
| Machine Weight |
2,867 lbs
|
20” x 25” Amada Vertical Tilt-Frame Band Saw Model VT5063SW (2150APC) Automatic Features:
- SPEED RANGE: Infinitely Variable 30 – 500 fpm (9 – 152 m/min), 10 HP standard. Blade speed can be automatically set when material is selected
- TILTING COLUMN: For miter cutting up to 60° left and right of vertical. Now with Electronic Tilt, the column is electrically powered with encoder feedback and PC3 touch screen controller for precision miter positioning
- 0° – 3° CANTED COLUMN: Standard 3º forward approach angle, for increased efficiency in cutting off structural materials
- BLADE GUIDE: Patent pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning design
- UPPER BLADE GUIDE ARM: Hydraulically positioned and locking, controlled by selector switch at operation’s station
- FLUSHING HOSE: Washes chips from hard to get at places reducing clean-up time
- WORK-REST ROLLERS: Two turned ball bearing rollers, one on the entry side and one on the discharge side of the machine bed
- VISES: Hydraulic, full stroking with 9-1/2″ high x 15″ wide 60º faceplates. Removable face plates without tools to allow for both miters and 90º at the blade
- PC3 PROGRAMMABLE CONTROL®: Provides a Programmable Logic Control Unit with a 12” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library
- AUTOMATIC BAR FEED: The patented automatic bar feed design features a 48″ stroke length with indexing speeds of up to 60fpm. The bar feed is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005″ per index. Optional long stroke shuttles
- EAGLE BEAK VTR BLADE: 18’2″ long x 1.5″ wide blade, with 3/6 tooth pitch. Standard blade that is included with machine purchase
20” x 25” Amada Vertical Tilt-Frame Band Saw Model VT5063SW (2150APC) Options:
| Powered Chip Conveyor (2125DA00342) | $5,460.00 |
| Variable Vise Pressure (2125AB00332) | $600.00 |
| Second Machine Vise – Complete RH-(2125SF4) LH-(92D290DABD01) | $3,200.00 |
| Hydraulic Hold-Down – Machine LH-(2125GA01092) RH-(2125GA01093) | $2,900.00 |
| Hydraulic Hold-Downs – Shuttle – Standard for use with 48” Shuttle (2125PCSF8AD4FT) | $2,830.00 |
| Mist Lube – Automatic (2125SML2) | $1,515.00 |
| Smart Guide Arm (2125BD01342) | $1,620.00 |
| Marvel Classic Color Scheme (Gray with yellow vises and Marvel logo) | $1,030.00 |
| Bullet Nose Cutting | $5,780.00 |
| Opposite Hand Work Entry | $1,600.00 |
| Manual (Hand Crank) Chip Conveyor (2125DA00341) | $3,230.00 |
| Outboard Vise on Shuttle (2125FD00351) | 5,190.00 |
| 45º Vise Jaw Faceplates (2125SF5) | 1,330.00 |
| Square (90°) Vise Jaws 13″ (2125SF6DLH, 2125SF6DRH) | 2,150.00 |
| Square (90°) Vise Jaws 18″ (2125SF7DLH, 2125SF6DRH) | 2,460.00 |
| Square (90°) Faceplates for Shuttle Vise (LS): (2125FD00343, 18”) | 2,160.00 |
| Hydrualic Hold-Downs, use w/ Ext. Feed Shuttles LH-(2125SF8A) RH-(2125SF8ADM4) | 5,920.00 |
| Unist Coolube 2210 (price per gallon) | 180.00 |
| Laser Alignment Light (2125A01459) | 1,830.00 |
| Offline Programming Package (2125SF17185) | 2,000.00 |
| Router for Ethernet Connect (2125EA17852) | 1,080.00 |
| Offline Programming Package(2125SF17185) + Router for Ethernet Connect (2125EA17852) | 2,970.00 |
| PC3 Offline Nesting Software-Addon (REQUIRES OFFLINE SOFTWARE) | 3,140.00 |
| Automatic Feed System with 8 Foot Maximum Single Index | 30,020.00 |
| Extended Automatic Feed System with 13 Foot Maximum Single Index | 36,640.00 |
| Extended Automatic Feed System with 18 Foot Maximum Single Index | 46,880.00 |
| First Section Dead Roller Table, 5’ 0” (1524 mm) Long | 8,210.00 |
| First Section Free Standing Dead Roller Table, 5’ 0” (1524 mm) Long | 8,100.00 |
| First Section Dead Roller Table, 10’ 0” (3048 mm) Long | 11,020.00 |
| First Section Free Standing Dead Roller Table, 10’ 0” (3048 mm) Long | 10,800.00 |
| First Section Dead Roller Table with Manual Gauge 10’ 0” (3048 mm) Long | 27,210.00 |
| First Section Dead Roller Table with Hydraulic Lift Gauge 10′ 0″ (3048 mm) Long | 28,620.00 |
| Extension Dead Roller Table 5’ 0” (1524 mm) Long (2125FK19129) | 5,460.00 |
| Extension Free Standing Dead Roller Table 5’ 0” (1524 mm) Long | 5,130.00 |
| Extension Dead Roller Table, 10’ 0” (3048 mm) Long | 8,630.00 |
| Extension Free Standing Dead Roller Table, 10’ 0” (3048 mm) Long | 8,810.00 |
| Extension Dead Roller Table, 5′ 0″ (1524 mm) Long with Gauging | 8,910.00 |
| Extension Dead Roller Table, 10′ 0″ (3048 mm) Long with Gauging | 11,670.00 |
| Aligning Guide | 2,420.00 |
| Flush Plates | 110.00 |
| First Section Live Roller Table 10’ 0” (3048 mm) Long | 25,920.00 |
| Automatic Power Roller Extension | 6,480.00 |
| Live Roller Table 5’ ’0” (1524 mm) Long | 8,700.00 |
| Extension Live Roller Table 10’ 0” (3048 mm) Long | 14,580.00 |
| Live Roller Table 5′ 0″ (1524 mm) Long with Gauging | 11,130.00 |
| Extension Live Roller Table 10′ 0″ (3048 mm) Long with Gauging | 15,990.00 |
| Work Ejector, 10’0” (3,048mm) Long | 24,200.00 |
| Extension Work Ejector 5’0” (1,524mm) Long | 15,020.00 |
| Extension Work Ejector 10’0” (3,048mm) Long: | 13,500.00 |
| Transformer for 208 volt (2125PE16848) or 230 volt (2125PE16849) | 4,270.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.
Reviews
There are no reviews yet.