Description
10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S
The 10″ x 16″ DoALL 400S general purpose band saw is part of the StructurALL® family of horizontal metal cutting scissor saws. Swiveling 45 degrees, it’s the ideal machine for the small to medium fabricator or machine shop, looking to make extremely accurate (straight or miter) cuts in smaller quantities. The DoALL 400S model features a 10″ (229mm) high x 16″ (406mm) wide capacity of rectangles and 10-3/4″ (273mm) rounds. This 10″ x 16″ DoALL manual machine can be equipped with a variety of options to further ease operation, such as pneumatic head-lift and pneumatic vise attachments.
10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S Specifications:
| Capacity at 90° rectangle | 10″ x 16″ |
| Capacity at 90° round | 10-3/4″ |
| Capacity at 45° rectangle | 9″ x 10-3/4″ |
| Capacity at 45° round | 10-3/4″ |
| Saw blade (width x length) | 1″ x 158″ |
| Band Drive | |
| Motor HP | 2 Hp |
| Band speed | 105-275 fpm |
| Band tension | Manual |
| Hydraulic System | |
| Motor HP | N/A |
| Reservoir size | N/A |
| Coolant System | |
| Flood | Yes |
| Mist lubricator | Opt |
| Motor HP | 1/15 Hp |
| Reservoir size | 6 gallon |
| Indexer | |
| Length per stroke | N/A |
| Maximum index strokes length | N/A |
| Remnant length | N/A |
| Floor Space Dimensions | |
| W x L x H | 87″ x 42″ x 55″ |
| Material pass height | 29″ |
| Machine weight | 1,200 lbs |
| Electrical | |
| Voltage requirement (Wye configuration-must specify at order placement) | 208V, 230V, or 460V-60Hz-3ph |
| Total amp draw (FLA) | 10.7 (208) 10.7 (230) 5.3 (460) |
10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S Standard Equipment:
- Swivel head to 45 degrees
- Fine adjustment head feed control
- Movable control console
- Rapid head down approach
- Spring loaded, zero clearance, coolant through, carbide faced saw guide inserts
- Quick action rack and pawl vise system w/ Acme Thread
- Gear driven band cleaning brushes
- Infinity variable pulley band speed
- Heavy duty counter balance spring
- Flange backing band wheels
- Manual band tension
- Recirculating coolant system
- Discharge tray
- Replaceable steel wear plates on bed
- Saw blade guards
- Band door interlocks
- Operation and parts manuals on USB stick
- Recommended band speed chart
- One (1) complimentary DoALL Bi-Metal saw blade
- Complimentary DoALL Cutting Fluids package
10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S Optional Accessories:
| 1008819 Full cycle attachment provides pneumatic head raise/vise operations allowing for head raise to pre-determined height after the cut in auto mode. Pneumatic operations remain active in manual mode. | $3,000 |
| 231546 5 ft Medium-duty idler conveyor 16″ between frames. Roller capacity 850 lbs. | $1,520 |
| 231547 10 ft Medium-duty idler conveyor 16″ between frames. Roller capacity 850 lbs. | $2,477 |
| 202786 Additional conveyor rollers | $79 |
| 1009399 24″ Discharge table | $370 |
| 224531 18″ Adjustable work stop – Requires item 1009399 | $758 |
| 214936 Band mist lubricator | $1,860 |
| 221545 Work light | $304 |
| 1010956 Laser line generator | $1,248 |
| 178639 Flushing hose attachment | $183 |
| 299998 Additional USB stick of manuals | $91 |
| NRTL A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards | $3,500 |
| SVC CHARGE LABOR Four (4) hours installation and operator training | $600 |
| Warranty DoALL Cut Above 10 Year Warranty Annual Investment | $840 |
| 1200006 Starter Kit of Six Pack Blades Consist of 1 each Silencer Plus 3-4, 4-6, 5-8, 8-12 and StructurALL 4-6, 5-8 | $384 |
| 13410245 5 Gal. Pail of Band All 102 Semi Synthetic | $160 |
| 21200045 5 Gal. Pail of AL-2000 Mist Coolant | $240 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.