31.25” x 37.5” New Marvel Vertical Tilt-Frame Band Saw Model 2150APC USA Made!

Terms: Check with Order

 

  • 7.5 H.P. VT5063S (2125APC)
  • 10 H.P. VT5063SW (2150APC)
  • 1-1/4″ Blade VT5063S (2125APC)
  • 1-1/2″ Blade VT5063SW (2150APC)
  • Marvel Series (2125APC/2150APC)
  • Automatic Indexing
  • Heavy-Duty
  • Hydraulic
  • Metal Cutting
  • High-Speed Bandsaw
  • Programmable Control
  • Servo Shuttle
SKU: 33762 Categories: ,

Description

31.25” x 37.5” New Marvel Vertical Tilt-Frame Band Saw Model 2150APC USA Made! is the Worlds Largest Vertical Tilt-Frame. 

31.25” x 37.5” New Marvel Vertical Tilt-Frame Band Saw Model 2150APC USA Made! Specifications:

Model VT5063S & VT5063SW

Cutting Capacity

Round (Diameter)

at 0° 20.0″ 508 mm
at 45° 17.0″  432 mm
at 60° 11.25″ 286 mm
Rectangle (W x H)
at 0°  20.0″ x 25.0″ 508 x 635 mm
at 45° 20.0″ x 17.0″ 508 x 432 mm
at 60° 20.0″ x 11.25″ 508 x 286 mm
Maximum Vise Opening
20.25″ 514 mm
Work Load Capacity 8,000 lbs 3,628 kg
Saw Blade
Dimensions (L x T x W) VT5063S: 17′ 6″ x 0.042″ x 1-1/4″
VT5063SW: 18′ 2″ x 0.050″ x 1-1/2″
VT5063S: 5334 x 1.1 x 34 mm
VT5063SW: 5537 x 1.3 x 41 mm
Blade Speed 30-500 ft./min by Inverter 9-152 m/min by Inverter
Tension Control Hydraulic
Blade Control
Cutting Control Direct Force Sensing Electric Ball Screw
with PC3 Programmable Control
Blade Feed Force 0 to 300 lbs 0 to 1334 N
Vise Operation
Type Main Vise (Optional second vise is available to install)
Control Hydraulic, Full Stroking with 9-12″ High x 15″ Wide 60° Faceplates
Motors
Saw Blade VT5063S: 7.5 HP
VT5063SW: 10 HP
VT5063S: 5.6 kW
VT5063SW: 13.6 HP
Hydraulic Pump  5 HP 3.7 kW
Cutting Fluid Pump 1/8 HP 0.1 kW
Tilt Gear  1/15 HP 0.05 kW
Power Requirement
Power Supply Voltage AC230V±10% or AC460V±10%, 3 PH, 60 Hz
Voltage must be specified when ordering
Power Requirement  
Cutting Fluid
Tank Capacity 60 gal 227 liters
Pump Type Electric
Hydraulic
Tank Capacity 10 gal 38 liters
Chip Disposal
Manual
Standard Feed Vise
Index Mechanism Shuttle Vise
Material Index AC Servo Motor and Ball Screw
Feed Stroke 48″ 1219 mm
Remnant Length 23″ Plus Length of Parts 584 mm Plus Length of Parts
Optional Shuttle Table
Feed Mechanism Automatic Servo Drive Index with Linear Guide System
Feed Stroke 8, 13 and 18ft
(It must be specified when ordering)
2438, 3962 and 5486mm
(It must be specified when ordering)
Machine Dimensions (W x L x H) 94.7″ x 99.2″ x 90.8″ 2404 x 2518 x 2305 mm
Table Height (Above Floor) VT5063S: 38.0″
VT5063SW: 40.0″
VT5063S: 965 mm
VT5063SW: 1016 mm
Machine Weight 2,867 lbs 1,300 kg

31.25” x 37.5” New Marvel Vertical Tilt-Frame Band Saw Model 2150APC USA Made! Features:

  • Tilting Column
    •  For miter cutting up to 60° left and right of vertical. Now with Electronic Tilt, the column is electrically powered with encoder feedback and PC3 touch screen controller for precision miter positioning.
  • 0° – 3° Canted Column
    • Standard 3° forward approach angle, for increased efficiency in the cutting of structural materials. NOTE: If the non-canted 0° option is required with a 1.25” blade, the VT5063SW (2150APC) must be purchased. The VT5063SW (2150APC) order must specify that the 1.25” blade is required with the non-canted option.
  • Blade Guide
    • Patent-pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning design.
  • Upper Blade Guide Arm
    • Hydraulically positioned and locking, controlled by a selector switch at the operator’s station.
  • Flushing Hose
    • Washes chips from hard to get at places reducing clean-up time.
  • Work-Rest Rollers
    • Two turned ball-bearing rollers, one on the entry side and one on the discharge side of the machine bed.
  • Vises
    • Hydraulic, full stroking with 9-1/2” high x 15” wide 60° faceplates. Removable face plates without tools to allow for both miters and 90° at the blade.
  • Automatic Bar Feed
    • The patented automatic bar feed design features a 48″ stroke length with indexing speeds of up to 60fpm. The bar feed is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005″ per index. Optional long-stroke shuttles.
  • PC3 Programmable Control®
    • Provides a Programmable Logic Control Unit with a 12” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library.

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.