Description
110 Ton New Piranha Ironworker Model P-110
Piranha ironworker model P-110 specifications.
|
Punch Capacity |
110 Tons |
|---|---|
| Punch Throat | 12″ |
| Closed Height w/o Die Block | 10-1/4″ |
| Stroke | 5-1/4″ |
| Platen Table Size (D-W) | 14-1/2″ x 21″ |
| Punch Hole Size (Max. Material) Max. Hole Size (Material) |
110 Tons 1-7/16″ (1″) 5″ (1/4″) |
| Plate Sheer | 20-1/2″ Long 1″ x 12″ 3/4″ x 18″ 1/2″ x 20″ |
| Angle Sheer | 6″ x 6″ x 5/8″ |
| Bar Sheer Round (min. to max.) Square (min. to max.) |
1/2″ to 2″ 1/2″ to 1-3/8″ |
| Coper-Notcher (Tons) (Max.) |
95 4″ x 6″ x 3/8″ |
| Bending Attachment (optional) | 12″, 24″ |
| Punch End – Strokes Per Minute Optional Speed-Up Kit |
30 @ 3/4″ 41 @ 3/4″ |
| Work Station Height Approx. | 44″ |
| Fluid Capacity (gal.) | 25 |
| Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase 7 Voltage Available |
10 HP 3 Ph. |
| Dimensions (Net) W-L-H Approx. |
35″ x 90″ x 66-1/2″ |
| Weight (Net) Lbs. Approx. | 5800 |
P-110 Piranha Ironworker Features
- A Complete Punching Attachment with split dove tail mounting.
- 5 Punch and Die sets.
- Set of Angle Knives [8 way top] [4 way bottom]
- Set of Coper Knives [2 way top] [4 way bottom]
- Automatic Urethane Hold Down on the Punch Stripper, Angle, Plate and Bar Shear
- Front and rear 5 position joy stick controls (electric) to jog up & down, fast up & down, neutral
- Remote Electric Foot Switch that can be connected at either end of the machine
- Electric Limit Switch are used to control the ironworkers stroke.
- A set of Round Bar Knives [2 way] (customers choice to 2)
- Set of 16.625 Plate Shear Knives [4 way]
- One set of 20.5″ Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625″ Plate Shear Knives)
- Extra Blank Knife to extend the Ironworkers shear to 20.5″
- Chip Buckets for easy clean up. (2 each)
- Extra Oil Filter for simple maintenance.
- Coupling Wrench & 3/8″ Allen Wrench
- Integral Lifting Lug for instant portability
P-110 Piranha Ironworker Accessories
| Performance / Motor Options | |
| Speed up kit increase to 41 strokes at ¾” per min. | $1,500.00 |
| Single Phase Motor (Not available with speed up) | $850.00 |
| Pipe Notching Attachments | |
| ¾” Schedule 40 Die (4433642) | $432.00 |
| 1” Schedule 40 Die (4433636) | $432.00 |
| 1-1/4” Schedule 40 Die (4433637) | $432.00 |
| 1-1/2” Schedule 40 Die (4433638) | $432.00 |
| 2” Schedule 40 Die (4433639) | $526.00 |
| Fig. EF Pipe Notching Striker (4433641) | $38.00 |
| Pipe Notching Die Holder (4433631) | $265.00 |
| Oversized Punching Attachments | |
| 2” Max Hole (4441622) | $1,745.00 |
| 3” Max Hole (4441624) | $1,945.00 |
| 4” Max Hole (4441626) | $2,345.00 |
| 5” Max Hole (4441628) | $2,545.00 |
| Bending Attachments | |
| 12” Bending Attachment (4441648) | $1,995.00 |
| 14” Bending Attachment (4441503) | $2,195.00 |
| 24” Bending Attachment (4441510) | $2,995.00 |
| 24” Press Brake Tool Holders (4441960) | $3,195.00 |
| Channel Attachments | |
| Channel Die Block (4431615) | $895.00 |
| Channel Shear 2”- 8” (4441600) | $3,843.00 |
| Channel Shear Kit C 4×5.4# (260291) | $1,495.00 |
| Channel Shear Kit C 5×6.7# (260292) | $1,495.00 |
| Channel Shear Kit C 6×8.2# (260293) | $1,495.00 |
| Backgauge Attachments | |
| 3’ Manual (44417501) | $2,295.00 |
| 3’ Auto Cycle (44417503) | $5,895.00 |
| 6’ Manual (44417506) | $2,495.00 |
| 6’ Auto Cycle (44417507) | $6,095.00 |
| 9’ Manual (44417509) | $2,895.00 |
| 9’ Auto Cycle (44417508) | $6,295.00 |
| 12’ Manual (44417502) | $3,095.00 |
| 12’ Auto Cycle (44417504) | $6,495.00 |
| Material Handling Attachments | |
| 5’ Roller Feed Table (4431850) | $2,095.00 |
| 5’ Quick Set Table Extension (4431618) | $1,795.00 |
| 10’ Quick Set Table Extension (4431619) | $1,795.00 |
| Punch Quick Set Plate/Angle Gauging Table (44416201) | $1,795.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
