12′ x 200 Ton New Standard Press Brake Model AB200-12 – IN STOCK

  • 5 Year Parts Warranty
  • 5 Year Limited Onsite Labor
  • Unlimited telephone support at no charge
  • USA MADE!

Terms: Check with Order

 
SKU: 34644 Category:

Description

12′ x 200 Ton New Standard Press Brake Model AB200-12 for sale at Worldwide Machine Tool located in Columbus Ohio.

Shipping Weight 32,000 lbs
Forming / Punching 200 / 135 Tons
Bed/Ram Length 12 ft
Between Frames 10′-5″
Open Height 14 in
Stroke 8 in
Closed Height 6 in
Throat Depth 10 in

 

 

 

 

12′ x 200 Ton New Standard Press Brake Model AB200-12 Features

  • Full length bends where full tonnage across the bed is a necessity for the truest bends
  • Off-center loading when any amount of the brakes tonnage is needed across the bed
  • Center loading where any amount of the brakes tonnage is required
  • Multiple die set-ups across the bed that require varying amounts of tonnage
  • Punching applications in one area or at varied locations across the bed – each brake has a counter balance valve to allow the least shock to the hydraulic system
  • Short piece work, with some of the fastest ram speeds on any brake, your small piece work is done quickly, easily and with precision.
  • Any Size Facility will benefit for the Standard Industrial brake from the price conscious smaller facility that does piece by piece work up to the 3 shifts a day high production manufacturers that require dependable, low maintenance machines with readily available components for minimal downtime
  • Standard Industrial is 100% Owned, Operated and Manufactured In The U.S.A.
  • 5 Year Across The Board Parts and Limited Labor Warranty
  • Unheard of Factory and Dealer Service and Support
  • Full-Tonnage Throughout Stroke
  • Typical 30+ Year Lifetime, Plus a Lifetime of Parts and Service Availability
  • Solid, Non-Moveable Lower Beam Substantially More Rigid Than “Bed Level” press Brakes
  • ± 0.001″ Ram Repeatability
  • Off-center loading Capability
  • The Most Heavy Duty Press Brake Built In The U.S.A.
  • Extremely Heavy-Duty lower beams allowing the least amount of deflection. Less Deflection = Longer Tool Life = More Profitability.
  • Groove in bed for tooling is standard on all brakes.
  • All Components are readily available from your local suppliers and are covered by our 5 year warranty
  • All parts will be readily available for a lifetime from anywhere in the U.S.A.
  • Precision mechanical in-line depth stop as back-up for any CNC control
  • The in-line depth stop insures NO Down-Time due to computer failure.
  • Simple and Precise Ram level Indicator
  • Always visible, easy to read
  • Simple and Precise Ram Level Adjustment
  • Infinite ram to bed level adjustment of ± 1/8″ from centerline
  • Newly designed compact rams with minimal overhang
  • Provides full forming ability

Single Cylinder Hydra-Mechanical Drive System

  • Each A660 bronze bearing is guaranteed for 5 Years
  • Our exclusive 1 Cylinder design means no balancing act like 2 cylinder systems with uneven tonnage.
  • Each bearing is designed to withstand 6 Times Total Tonnage of brake
  • Full tonnage throughout stroke and full tonnage the entire length of the bed and ram
  • Incredibly Simple To Troubleshoot
  • All Parts Available To You locally
  • Exceptional Ram Speeds For Fastest Strokes Per Minute
  • 5 Year Parts Coverage
  • Fewer Hoses, Tubing, Fittings Provides Far LESS Maintenance And Downtime
  • Located overhead to provide clear operator area

100% Owned, Operated and Manufactured In The U.S.A.

The hydraulic/mechanical system as used by Standard is certainly a superior concept as evident by the number of manufacturers currently offering similar products. However, we have more experience in years and thousands of products designed and manufactured than any in the business. Our design experience is reflected in our size and type of bearings and shafts as well as our technical capability to design a bellcrank system that does not have excessive side loads. All forces are vertical above the ram centerline and are contained in the “box” structure that houses the drive system and ram guides.

The ram of the press brake is guided by heavy duty slides as used in straight side presses. These slides are located both front and back of each end of the ram and are clearly superior to the small rear mounted guides found on other press brakes.

All press brakes require guides to contain end movement of the ram. Other manufacturers use tiny segmented guides incorporated in the main ram guides. The Standard design is to provide a heavy duty, self aligning system at the rear center of the ram and located inside the press frame. This system requires no operator action when the ram level is adjusted.

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/