Description
10′ x 14ga New Tennsmith Electro-Mechanical Shear Model LM1014 Specifications:
| Capacity (Mild Steel) | 14 Gauge 2 mm |
| Capacity (Stainless Steel) | 18 Gauge 1.25 mm |
| Maximum cutting length | 121″ 3073 mm |
| Back gauge range | 30″ 762 mm |
| Strokes per minute | 35 |
| Motor | 5 hp (230/460v, 3-Phase, 60Hz) |
| Number of holddowns | Solid bar with non-marring urethane insert |
| Floor Space | 143″ x 72″ x 56″ 3632 mm x 1829 mm x 1423 mm |
| Shipping Weight | 5,900 lbs |
10′ x 14ga New Tennsmith Electro-Mechanical Shear Model LM1014 Features:
- Unique 2x back-gauge system
- Four edge, high carbon/high chromium (HCHC) top and bottom blades
- Independent, self-leveling hold-down feet with neoprene inserts
- Single, continuous and job stroke cycles
- Motor reverse switch
- Precision-machined table with hand well
- Dual inch/metric inlaid bed scales
- Non-metallic gibs
All MSE and LM models come standard with the unique 2x back-gauge system. The design of the 2x allows the operator to position the back stop from 0 to 30 inches with only two rotations of the handle. Speed of the 2x is unmatched with positioning speeds of only 2 seconds. With the combination of the optional digital readout for 2x back gauge system, the operator adds both speed and great accuracy to the job. The optional digital display shows measurements in 0.001″ increments. Longer travel ranges are available by request.
Models LM410, LM610, LM810, LM1012, LM1014 and LM1214 incorporate the unique 2x back gauge system. This allows the operator to move the backstop from 0 up to 30 inches (0 to 24 inches for Model LM410) in approximately 2 seconds with only two rotations of the handle. An optional digital readout is available for this system.
The LM Series shears are standard with four edge, high carbon/high chromium (HCHC) top and bottom blades, independent, self-leveling hold-down feet with neoprene inserts, single, continuous and job stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metallic gibs.
The LM Series shears are now available in an optional “Performance Package” configuration which includes a 5′ squaring arm, a pair of front support arms, and an air operated sheet support is available in two styles:
- System R drops the supported material to the rear of the machine.
- System F returns the supported material to the front of the machine via a front return chute.
10′ x 14ga New Tennsmith Electro-Mechanical Shear Model LM1014 Shear Options:
| Wired for CSA Canadian Electrical Standard | $395.00 |
| Wired for Single Phase Electrics | $1,895.00 |
| Squaring Arm, Five Foot with Dual Inlaid Inch/Metric Scale | $1,275.00 |
| Squaring Arm, Ten Foot with dual Inlaid Inch/Metric Scale | $2,850.00 |
| Additional Flip-up Stops for Squaring Arm (each) | $250.00 |
| Front Support Arms, Pair | $350.00 |
| T-Slotted Table with Two Front Support Arms with Inlaid Inch/Metric Scales | $2,275.00 |
| Additional Flip-up Stops for T-Slotted Support Arms and Table (each) | $250.00 |
| Power Back-gauge 30-Inch Travel | $7,200.00 |
| Protractor Attachment | $730.00 |
| Work Shadow Light LM Series | $1,050.00 |
| Digital Readout for 2x Back-gauge System | $1,250.00 |
| Stroke Counter (Electro-Mechanical) | $375.00 |
| High Carbon High Chrome, 4 Edge per set | $2,600.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.