Description
37″ New Ibarmia Geared-Drive Column Drill Model BP50RS Specifications:
Capacities | |
Maximum drilling capacity in steel | 1.97″ |
Maximum drilling capacity in cast iron | 2.36″ |
Maximum tapping capacity in steel | 1.65″ |
Maximum tapping capacity in cast iron | 1.97″ |
Specifications | |
Spindle taper | 4MT |
Optional spindle taper (on request) | ISO-40 |
Quill diameter | 3.46″ |
Spindle travel (drilling depth) | 9.06″ |
Main motor power | 5.5 Hp |
Coolant pump motor power | 0.12 Hp |
Head geared-motor power | 1.5 Hp |
Number of speeds (see speed chart) | 9 |
Spindle speeds (9) BP50/BP50L | 82-120-180-240-354-528-722-1098-1524 |
Number of automatic feeds | 4 |
Auto feed range (in./rev.) | 0.0039 / 0.0079 / 0.0118 / 0.0157 |
Dimensions and Weights | |
Height BP50/BP50L | 97.2″ / 122.8″ |
Base length BP50/BP50L | 55.9″ / 58.6″ |
Spindle to table BP50/BP50L | Minimum 11.02″ / 25.6″ Maximum 39.4″ / 64.9″ |
Spindle center to column | 18.7″ |
Maximum head height BP50/BP50L | 108.3″ / 133.9″ |
Worktable width | 23.62″ |
Table height | 27.56″ |
Worktable length | 27.56″ |
Overall width | 39.37″ |
Net weight BP50/BP50L | 3,086 / 3,527 lbs. |
Shipping weight BP50/BP50L | 3,527 / 4,078 lbs. |
Shipping dimensions (L x W x H) | BP50 48” x 107” x 79” BP50L 48″ x 130″ x 79″ |
37″ New Ibarmia Geared-Drive Column Drill Model BP50RS Features:
- Automatic feed reversing system for tapping (RS models)
- Adjustable of vertical position of head by geared-motor
- Head rotates 45º left or right of center
- Large worktable with 3 T-slots
- Hardened and ground high quality steel gears
- Gear box lubrication by automatic pump
- Guide ways lubricated by manual pump
- Speed plate and selecting levers on front of head
- Coolant tank and pump in machine base
- Automatic feed and cut-off by electromagnetic clutch
- Work light
- Front hand wheel for fine feed work
- Depth scale and adjustable depth stop
- Built-in low voltage electrical equipment in column rear
- Emergency STOP
- Automatic tool ejector
- Forward and reverse turn push buttons
- Drill guard with microswitch
37″ New Ibarmia Geared-Drive Column Drill Model BP50RS Optional Accessories:
Factory Installed | |
RPF-P Pitch Control Tapping w/ Braking System | $4,560.00 |
HGP-P Master Guide Spindle w/ Nut Set | $725.00 |
HGP-S-P Master Guide Spindle w/ Nut Set w/ Special Thread (inches etc.) | $1,110.00 |
ACNL-P Pneumatic Counter Balance w/ Rapid w/ Pitch Control | $6,105.00 |
ACNL-2-P Pneumatic Counter Balance w/ Rapid Approach & Retract (2 cylinders) | $7,015.00 |
CI-P Integral Drilling Cycle w/ Encoder | $8,775.00 |
MB-F Security Bimanual Command | $1,505.00 |
CN-P Pneumatic Counter Balance | $1,690.00 |
ISO-40-P ISO 40 Spindle w/ QC Nut | POA |
P99200 Motor, 1200 RPM | POA |
P99210 Motor, 3600 RPM | POA |
P99230 Motor, 1800/3600 RPM | POA |
Cross Slide Table | |
MH-4 Cross Table 27.5″ x 14″ | $17,975.00 |
All Accessories | |
PST Cycle Start Foot Pedal | $835.00 |
PSR Foot Pedal for Reversing (Must have the RS version) | $835.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/