Description
19.7″ New Ibarmia Belt-Drive Column Drill Model KL25 Specifications:
Capacities | |
Maximum drilling capacity in steel | 1″ |
Maximum drilling capacity in cast iron | 1.18″ |
Maximum tapping capacity in steel | 0.71″ |
Maximum tapping capacity in cast iron | 0.87″ |
Specifications | |
Spindle taper | 3MT |
Quill diameter | 2.44″ |
Spindle travel (drilling depth) | 4.72″ |
Main motor power (230/460v 3 ph.) | 1/1.8 Hp |
Manual step pulley (10 steps) | 240-4800 rpm |
Electronic variable speed drive | 300-4800 rpm |
Standard motor 900/1800 spindle speeds (rpm) | Low: 295-425-1000-1490-2400 High: 590-850-2000-2980-4800 |
Spindle speeds EVS | 295-4800 rpm |
Dimensions and Weights | |
Height | 42.1″ |
Height (with optional base) | 73.6″ |
Base (L x W) | 22″ x 15″ |
Base to spindle | |
Spindle to table | Minimum 4.33″ Maximum 19.7″ |
Spindle center to column | 9.84″ |
Worktable (L x W) | 10.6″ x 11.8″ |
Base height | 3.1″ |
Column diameter | 3.94″ |
Floor to top of base (w/ opt cabinet) | 34.6″ |
Optional cabinet height | 31.5″ |
Net weight | 418 lbs. |
Shipping weight | 440 lbs. |
Shipping dimensions (L x W x H) | 28” x 23” x 54” |
19.7″ New Ibarmia Belt-Drive Column Drill Model KL25 Features:
- RS models are equipped with automatic feed reversing system for tapping
- EV models are equipped with electronic variable speed
- EVRS models are equipped with electronic variable speed and automatic feed reversing system for tapping
- Depth scale and adjustable depth stop
- Thermomagnetic switch
- Spindle reversing switch
- Automatic tool ejector
- Emergency STOP
- Drill guard with interlock
19.7″ New Ibarmia Belt-Drive Column Drill Model KL25 Optional Accessories:
Factory Installed | |
MG-K Rotating Table (KM & KL models) | $1,260.00 |
Cross Slide Table | |
MCC-K Cross Table 13.8″ x 10.8″ | POA |
MB-1 Cross Table 8.6″ x 5.5″ | $4,205.00 |
Optional Base Cabinets (KM and KS Models) | |
PKA-K Floor Cabinets w/ Shelves | $1,490.00 |
PKB-K Floor Cabinets w/ Drawer | $1,830.00 |
All Accessories | |
PST Cycle Start Foot Pedal | $835.00 |
PSR Foot Pedal for Reversing (Must have the RS version) | $835.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/