Description
13″ x 14″ Marvel Horizontal Scissor Style Band Saw Model PA13MPC Specifications:
Cutting Capacity | |
Round (diameter) | 13″ |
Rectangle (W x H) | 13″ x 14.2″ |
Work Load Capacity | 6,250 lbs |
Saw Blade | |
Blade Size (L x T x W) | 13’6″ x 0.42″ x 1-1/4″ |
Blade Speed | 79-456 ft./min by Inverter |
Tension Control | Hydraulically Controlled |
Blade Control | |
Top Limit Setting | Automatic Setting with Quick Approach Feeler |
Cutting Control | Hydraulic Pressure & Flow Control Valve |
Vise Operation | |
Type | Front Split Vise and Rear Vise |
Control | Hydraulic Full-Stroke Cylinder |
Motors | |
Saw Blade | 5 HP |
Hydraulic Pump | 2 HP |
Coolant System | 1/4 HP |
Power Requirement | |
Power Supply Voltage | AC230V±10% or AC460V±10%, 3 PH, 60 Hz Required at Factory Voltage Setting |
Power Requirement | |
Cutting Fluid | |
Tank Capacity | 21 gal |
Hydraulic | |
Tank Capacity | 17 gal |
Pressure Setting | 569 psi |
Chip Disposal | Chip Conveyor |
Material Index | |
Index Mechanism | Shuttle Vise |
Stroke | |
Length | |
Number of Input Block | |
Number of Input Station | |
Number of Cut-Off Pieces | |
Remnant Length | |
Machine Dimensions (W x L x H) | |
Head-Up Position | x 85″ x 80″ |
Head Down Position | x 85″ x 53″ |
Table Height | 28.5″ |
Machine Weight | 4,200 lbs |
Features:
- SPEED RANGE: 70-330 feet per minute (21-101 meters per minute) variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. A read out on the operator’s touch screen assures accurate speed setting.
- BLADE GUIDE: The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of ± .002 per inch (.051 mm) of cut material.
- HYDRAULIC SHUTTLE FEED: Multi length shuttle indexing up to 999″. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy. Repeatability is ± .005″ per index. The shuttle vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts.
- HYDRAULIC DOWN FEED: Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
- MPC PROGRAMMABLE CONTROL: Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to 100 jobs. Inputs include Part Length from 0 to 999” (0-25 m) (in inches up to 3 decimal places) and Number of Pieces to be cut. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. The control provides the option of running up to 20 parts in one job consecutively. MPC Control includes a material library for setting speeds and feeds.
- FULL STROKING HYDRAULIC VISE JAWS: The front vise jaws are split to reduce the remnant to as little as 2.75” (70 mm). The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting.
- CHIP BRUSH: Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
- AUTOMATIC CHIP REMOVAL: The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations. Coolant is allowed to drain back to the tank before the chips are removed from the machine.
- VARIABLE VISE PRESSURE: Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.
- SGLB BLADE: These are the standard blades that are included with machine purchase.
- HMI TOUCH SCREEN CONTROL
- BI-DIRECTIONAL SHUTTLE VISE
- AUTOMATIC HEIGHT SELECTION WITH FAST APPROACH
- COVERED CHIP AUGER
- COVER INTERLOCKS
- STALLED OR BROKEN BLADE SENSOR
- LOCKOUT TAGOUT CAPABLE
- TWO HANDED FRONT VISE CLAMP OPERATION
- SAFETY RAILING AROUND SHUTTLE
Optional Accessories:
Automatic Mist Lube | $2,460.00 |
Hydraulic Hold Downs | $2,080.00 |
5′ Extension Roller Table | $680.00 |
5′ First Section Dead Roller Table | $850.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.
Reviews
There are no reviews yet.