Description
New Haas Vertical Machining Center Model VF-3YT Specifications:
Travels | |
X-axis travel (in.) | 40″ |
Y-axis travel (in.) | 26″ |
Z-axis travel (in.) | 25″ |
Spindle nose to table (max) | 29.2″ |
Spindle nose to table (min) | 4.2″ |
Spindle | |
Max rating | 30 hp |
Max speed | 8100 rpm |
Max torque | 90.0 ft-lbf @ 2000 rpm |
Max torque w/ opt gearbox | 250 ft-lbf @ 450 rpm |
Drive system | Inline direct-drive |
Taper | CT40 or BT40 or HSK-A63 |
Bearing lubrication | Air/Oil injection |
Cooling | Liquid cooled |
Table | |
Length | 54″ |
Width | 24″ |
T-slot width | 0.626″ – 0.630″ |
T-slot center distance | 3.15″ |
Number of std t-slots | 7 |
Max weight on table | 3500 lb |
Feedrates | |
Max cutting | 500 ipm |
Rapids on x | 710 ipm |
Rapids on y | 710 ipm |
Rapids on z | 710 ipm |
Axis motors | |
Max thrust x | 2550 lbf |
Max thrust y | 4100 lbf |
Max thrust z | 4100 lbf |
Tool changer | |
Type | Carousel |
Capacity | 20 |
Max tool diameter | 3.5″ |
Max tool weight | 12 lb |
Tool-to-tool | 4.2 s |
Chip-to-chip | 4.5 s |
Coolant capacity | 55 gal |
Air requirements | |
Air required | 4 scfm @ 100 psi |
Incline air hose | 3/8″ |
Coupler (air) | 3/8″ |
Air pressure min | 80 psi |
Dimensions | |
Domestic pallet | 156″ x 102″ x 109″ |
Weight | 12,560 lb |
Electrical specification | |
Spindle speed | 8100 rpm |
Drive system | Inline direct-drive |
Spindle power | 30.0 hp |
Input AC voltage (3 phase) | Low 220 VAC High 440 VAC |
Full loads amps (3 phase) | Low 70 High 35 |
40″ x 26″ x 25″ New Haas Vertical Machining Center Model VF-3YT Features:
- 8100 rpm spindle
- 20-pocket carousel tool changer
- Window air blast
- 55-gallon coolant tank
- Control touch screen
- Media display M-code; M130
- HaasConnect: remote monitoring
- Early power-failure detection module
- Ethernet interface
- WiFi connection for the Haas control
- Safe run
- HaasDrop
- Rigid tapping
- Standard program memory, 1 GB
40″ x 26″ x 25″ New Haas Vertical Machining Center Model VF-3YT Optional Accessories:
8,100-rpm spindle GB | $9,295 |
10,000-rpm inline grease-packed spindle | $7,295 |
10,000-rpm spindle | $6,095 |
10,000-rpm spindle GB | $13,195 |
12,000-rpm spindle, HSK-A63 | $8,095 |
15,000-rpm spindle | $7,595 |
15,000-rpm spindle, HSK-A63 | $15,095 |
30,000-rpm spindle | $35,595 |
30+1 side-mount tool changer | |
30+1 side-mount tool changer, HSK | |
50+1 side-mount tool changer | $15,495 |
50+1 side-mount tool changer, HSK | $18,895 |
4th-axis drive and wiring | $2,995 |
5th-axis drive and wiring | $8,995 |
Wireless intuitive probing system | $5,495 |
Probe riser block | $395 |
Programmable coolant nozzle | $1,995 |
Automatic air gun | $1,295 |
Through-tool air blast | $1,295 |
Minimum quantity lubrication | $2,095 |
PulseJet system | $2,095 |
Enclosure exhaust system | $1,895 |
Coolant mist condenser | $2,395 |
Automatic coolant refill | $1,395 |
Coolant maintenance package | $3,095 |
Haas chip lift | $3,995 |
Chip auger | |
95-gallon coolant tank | |
Through-spindle coolant ready | $1,095 |
Through-spindle coolant ready, 3rd party | $3,995 |
Through-spindle coolant | $5,995 |
Through-spindle coolant, 1k | $9,495 |
High-pressure flood coolant | $1,495 |
Coolant chiller | $2,095 |
Coolant tank oil skimmer | $595 |
Auxiliary coolant filter | $2,595 |
Chip tray filter kit | $95 |
Quad-auger system w/ conveyor | $11,995 |
Provision to accept automatic pallet changer | $4,195 |
Third-party rotary provision | $1,895 |
Large remote jog handle with touchscreen display | |
Spindle orientation | $1,295 |
User-definable macros | $3,495 |
Coordinate rotation and scaling | $1,795 |
Dynamic work offsets and tool center point control | $6,095 |
High-speed machining | $3,295 |
32 GB expanded memory | $1,395 |
64 GB expanded memory | $2,595 |
Visual part programming system | $2,595 |
8 spare M functions | $1,895 |
M-Code/MFIN cable assembly | $95 |
Second home position | |
Heavy-duty low-volt transformer | $3,995 |
Heavy-duty internal high-voltage isolated transformer | $3,995 |
Programmable air | $1,095 |
High-intensity lighting, 24V | $995 |
3.25″ extended Z-axis clearance | $4,395 |
WiFi camera | $695 |
24V work table light | $195 |
Edge sensor for automated systems | $495 |
Auto door for mills | $1,995 |
Accessory tooling block | $895 |
4″ programmable electric vise | $2,495 |
5″ programmable electric vise | $2,995 |
6″ programmable electric vise | $2,995 |
Electric vise ready | $1,495 |
The information above is for comparison purposes only. Worldwide Machine Tool is not an authorized Haas CNC dealer.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.