Description
12” x 18” New Marvel Horizontal Mitering Band Saw Model S330/3HV Specifications:
Cutting Capacity | |
Round (diameter) at 90° | 13″ |
Round (diameter) at ± 45° | 13″ |
Round (diameter) at − 60° | 8.7″ |
Rectangle (W x H) at 90° | 18″ x 12″ |
Rectangle (W x H) at ± 45° | 12″ x 12″ |
Rectangle (W x H) at − 60° | 11″ x 8″ |
Work Load Capacity | N/A |
Saw Blade | |
Blade Size (L x T x W) | 13’6″ x 0.035″ x 1″ |
Blade Speed | 60-330 FPM by Inverter |
Tension Control | Manual |
Blade Control | |
Top Limit Setting | Manual Setting |
Cutting Control | Hydraulic Flow Control Valve |
Vise Operation | |
Type | Single Vise |
Control | Adjustable Hydraulic Vises |
Motors | |
Saw Blade | 3 HP |
Cutting Fluid Pump | 1/8 HP |
Hydraulic Pump | 1/2 HP |
Power Requirement | |
Power Supply Voltage | AC230V±10%, 3 PH, 60 Hz, Required at Factory Voltage Setting |
Power Requirement | N/A |
Cutting Fluid | |
Tank Capacity | 12 gal |
Hydraulic | |
Tank Capacity | 4.5 gal |
Pressure Setting | N/A |
Chip Disposal | Manual |
Angle | |
Saw Frame Angle | – 60° ~ 90°~ +45° |
Angle Swivel | Manual |
Angle Display | Angle Scale |
Machine Dimensions (W x L x H) | |
Head-Up Position | 79.9″ x 64.2″ x |
Head Down Position | 79.9″ x 64.2″ x 57.2″ |
Table Height | 30.3″ |
Machine Weight | 1,543 lbs |
12” x 18” New Marvel Horizontal Mitering Band Saw Model S330/3HV Features:
- Speed Range: The S330/2HV blade speed is infinitely variable through an Inverter Drive heavy-duty worm gear transmission. Blade speeds are 60-330 feet per minute (18-100 meters per minute). The S330/3HV uses a 4 speed step pulley. Blade speeds are 105, 175, 270 and 375 feet per minute (32, 53, 82, and 114 meters per minute). The broad speed range allows for optimum cutting of a large spectrum of materials.
- Hydraulic Down Feed: Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting. Settings are made at the operator’s control station.
- Hydraulic Auto Frame Return: The saw frame will automatically raise hydraulically at the end of a saw cut. The saw frame can also be lifted hyraulically with the push button swtich.
- Blade Guides: Carbide Blade Guides provide reduced vibration, heat and blade stress providing longer blade life.
- Chip Brush: Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
- Vise Jaw: Hydraulic rack and pawl vise design clamps and holds the work piece securely. The vise is operated by a selector switch located on the operator’s control panel.
- Swivel Miter: The saw frame swivels a full 60 degrees to the rear and 45 degrees to the front for optimum miter cutting capability. Stops are provided at -60 and +45 degrees.
- Operators Control Panel: Operation of the machine is safe and convenient from the swing arm pedestal mounted on the machine base. Control Voltage is 110V.
- Hydraulic Down Feed: Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting. Settings are made at the operator’s control station.
- Hydraulic Auto Frame Return: The saw frame will automatically raise hydraulically at the end of a saw cut. The saw frame can also be lifted hydraulically with the push button switch.
- Chip Brush: Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
- Vise Jaw: Hydraulic rack and pawl vise design clamps and holds the work piece securely. The vise is operated by a selector switch located on the operator’s control panel.
- Swivel Miter: The saw frame swivels a full 60 degrees to the rear and 45 degrees to the front for optimum miter cutting capability. Stops are provided at -60 and +45 degrees.
- 16” (407 mm) Diameter Cast Iron Blade Wheels
- 30.5” (775 mm) Work Height
- Built In Coolant System
- Adjustable Guide Arm With Dove Tail Slide
12” x 18” New Marvel Horizontal Mitering Band Saw Model S330/3HV Optional Accessories:
Automatic Mist Lube | N/A |
Variable Vise Pressure |
N/A |
Free Standing Roller Table | N/A |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.
Reviews
There are no reviews yet.