10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2F

Description

10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2F

The backbone of Republic Lagun Machine Tool is the notable vertical knee mill model Lagun FTV2F. This mill features induction hardened and ground ways. This process is more consistent and precise than flame hardening and does not score or wear off like chrome. Our Lagun Mill features square ways for rigidity and dovetail ways for accuracy on the knee. No other machine has this feature. The vertical knee mill also consists of an extra wide saddle (23”) with Turcite to ensure smooth, non-stick and precise travel for the cross and table movement. A constant 5 HP motorized head with high velocity cooling system keeps the head at a constant temperature. In other words, Lagun’s Vertical Knee Mill, FTV-2F features surpasses its competition in capacity.

10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2F Specifications:

10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2F Features:

• The head is equipped with a “high velocity cooling system”. The generated “air flow” keeps the head at a constant temperature. The fully enclosed head will keep dust from the shop environment out, keeping critical parts and components such as: pulleys, belts, and bearings, etc., clean and dust free. (See detail A)
• The new head has two speed ranges, 5 HP constant drive, and infinite variable speeds. (see D) The dynamically balanced head (see B) reaches full horse power over all the speed ranges, (Low 55 to 490 – High 490 to 4,250 RPM) (See E) without the typical losses of EVS systems. This head is capable of reaching 358 ft-lb of torque (See –Graphic HP vs. RPMS) at a mere 55 RPM.
• The quill 3 3/8” (85 mm) is hard chromed with a precision ground rack.Special high performance transmission belt are used. The heart of our mechanical infinite variable speed milling head uses the same hi-technology found in the continuously variable transmission of the latest Hybrid automobiles.
• Spindle taper is R-8 (optional # 40 NST, #30 NST with four hi-precision, class 7 bearings.
• The head assembly can be tilted front-to-back and swiveled right-to-left.  Angular settings employ worm and gear.
• Ram/head assembly can be easily rotated a full 360° degrees. (See detail
• Massive ram features 19″ (483 mm) of bearing length and 22 3/16″ (563 mm) of travel. 
• The ram design allows use of the optional slotting attachment.  The slots are mounted opposite the standard head (with optional kit 149-1140K).
• All lead screws are thread rolled and precision ground.
• A unique double nut assembly provides backlash adjustment of longitudinal and cross feed screws.  Adjustment of this device eliminates backlash due to wear.
• Table & saddle locks are conveniently located in front of the machine. Handles are spring loaded to allow repositioning once locked. This advanced design clamps the table to the saddle, but does not push on a gib. As a result, the table will hold its position more accurately.

10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2F Standard Equipment:

• Spindle Taper R-8 with 4 ea. Class Seven Hi-Precision Bearings
• Flood Coolant System
• Hardened & Precision Ground Ways
• One Shot Lubrication System
• Draw Bar
• Operators Manual/Parts List
• Basic Service Tool Kit
• 3/60/220/440 Volt Electrics
• Base Chip Pan
• Halogen Worklight
• Way Covers

10″ x 55.25″ New Republic Lagun Vertical Mill Model FTV-2F Accessories:

10-220	220V MUST BE DECIDED AT TIME OF ORDER		$0.00
10-440	440V MUST BE DECIDED AT TIME OF ORDER		$0.00
10-UL-001	UL APPROVED		$1,580.00
10-204-1181-UL	SPECIAL ELECTRICS 220/440V NEMA ENCLOSURE		$5,300.00

 

10-UH150-B015	SPINDLE #40 TAPER W/ BEARINGS (SPECIFY W/ MACHINE ORDER)		$1,495.00
10-270-1162	QUILL MOUNTED INCH/METRIC DIGITAL SCALE		$638.00
10-085-0110A	POWER DRAW BAR, PNEUMATIC, USE WITH STANDARD DRAW BAR (POWER UNIT ONLY) (R8, NST 40, CAT 40)		$1,245.00

 

10-388AA	QUICK INDEX QUILL DOWN FEED HANDLE		$208.00
10-402Q	QUICK POSITION DOWN FEED QUILL STOP		$93.00
10-160-1168	MIST COOLANT SYSTEM		$1,475.00

 

SERVO #350 X-POWER FEED, LONGITUDINAL, 110V		$2,027.00
SERVO #350 Y-POWER FEED CROSS, 110V		$2167.00
SERVO #350 Z POWER FEED, KNEE LIFT, 110V		$2,200.00

 

10-192-1402	LAGUN LIGHTING, X-AXIS, LONGITUDINAL POWER FEED; 110V		$1,195.00
10-192-1403	LAGUN LIGHTING, Y-AXIS, CROSS POWER FEED; 110V **SEE PICTURE ABOVE**		$1,195.00
10-192-1404	LAGUN LIGHTING, Z-AXIS, VERTICAL KNEE LIFT; 110V **SEE PICTURE ABOVE**		$1,195.00

 

10-250-8090R-B	2 AXIS NEWALL NMS800 SYSTEM, 16 X 40		$4,029.00
10-252- 8085RBQ	3 AXIS NEWALL NMS800 SYSTEM W/ QUILL, 16 X 40 X 5 **SEE PICTURE ABOVE**		$5,283.00

 

10-252-8085RB-K	3 AXIS NEWALL NMS800 SYSTEM W/ KNEE, 16 X 40 X 16 **SEE PICTURE ABOVE**		$5,283.00
10-M203-8009- Q	3 AXIS ACU-RITE M203, W/ QUILL, 16 X 40 X 5		$3,950.00
10-M203-8009-K	3 AXIS ACU-RITE M203, W/ KNEE, 16 X 40 X 18 **SEE PICTURE ABOVE**		$3,738.00

 

10-121-1106	CLAMP KIT AND STUD SET52 PCS. 5/8″ TSLOTS		$430.00
10-086-1101	SET R-8 COLLETS 1/8″ TO .”11 PCS.		$435.00

 

10-2496-1120	COLLET RACK FOR R-8 COLLETS; 48 PCS.		$140.00
10-086-1101CR	COLLECT RACK FOR R-8 COLLECTS; 16 PCS.		$101.00
VISES
10-125-1116	LAGUN 6″ ANG LOCK, SWIVEL BASE VISE, 8″ OPENING		$689.00
10-125-1115-A	KURT 6″ DX6 ANG LOCK VISE, 9″ OPENING (OPT: SWIVEL BASE)		$1,385.00

10-22935604	SWIVEL BASE FOR KURT 6” VISE		$1,026.00
DRILL CHUCK
10-125-1110-1/2	1/2″ DRILL CHUCK (KEY TYPE) W/ R-8 SHANK		$345.00
10-125-1110-5/8	5/8″ DRILL CHUCK (KEY TYPE) W/ R-8 SHANK **SEE PICTURE ABOVE**		$390.00
10-125-1110B	1/2″ DRILL CHUCK (KEY TYPE) W/ #40 TAPER **SEE PICTURE ABOVE**		$520.00
10-140-1110-5/8	5/8″ DRILL CHUCK (KEY TYPE) W/ #40 TAPER **SEE PICTURE ABOVE**		$560.00
SHELL MILL
10-089-1104A-1	SHELL MILL ADAPTER IN R-8, .”		$214.00
10-089-1104A-2	SHELL MILL ADAPTER IN R-8, 1″ **SEE PICTURE ABOVE**		$229.00
10-089-1104A-3	SHELL MILL ADAPTER IN R-8, 1 .” **SEE PICTURE ABOVE**		$222.00
10-089-1104B-1	SHELL MILL ADAPTER IN # 40 TAPER, .” **SEE PICTURE ABOVE**		$327.00
10-089-1104B-2	SHELL MILL ADAPTER IN # 40 TAPER, 1” **SEE PICTURE ABOVE**		$327.00
END MILL HOLDERS
10-088-1102-R8	1 SET END MILL HOLDERS R8 TAPER; 7PC; 1/8″, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″		$998.00
10-088-1102B-1	1 SET END MILL HOLDERS-#40 TAPER; 7 PC; 1/8”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1” **SEE PICTURE ABOVE**		$2,385.00

10-127-1112A	RIGHT ANGLE ATTACHMENT; R-8		$1,869.00
10-127-1112B	RIGHT ANGLE ATTACHMENT; #40 TAPER (3 3/8” QUILL) **SEE PICTURE ABOVE**		$2,650.00
ARBORS
10-130-1114A	1″ ARBOR, 18-1/4″ LONG WITH BUSHINGS AND R-8		$1,020.00
10-130-1114B	1″ ARBOR, 18-1/4″ LONG WITH BUSHINGS AND #40 **SEE PICTURE ABOVE**		$842.00
10-129-1113A	ARBOR SUPPORT W/1″ ARBOR 9″ -R8		$1,290.00
CHUCKS
10-103-1176	COLLET CHUCK W/ SET OF 15 COLLETS FROM 1/8″ TO 1″, #40		$920.00
10-103-1176-M	#40 100TG COLLET CHUCK W/ 1 SET OF 8 METRIC COLLETS; 6MM, 8MM, 10MM, 12MM, 14MM, 16MM, 18MM, 20MM. **SEE PICTURE ABOVE**		$1,200.00
10-100-206-20	1 SET OF 8 COLLETS- METRIC, TO BE USED WITH COLLET CHUCK 100TG; SIZE 0.24 TO 0.79” (6 TO 20 MM).		$829.00
RISER BLOCK
10-146-1135A	4″ RISER BLOCK		$1,787.00
10-145-1135A	6″ RISER BLOCK		$1,881.00
10-147-1136A	8”RISER BLOCK		$1,989.00
10-148-1137	10″ RISER BLOCK		$2,119.00
10-148-1137A	12” RISER BLOCK		$2,277.00

10-179-1120	ROTARY TABLE; 10” DIAMETER HORIZONTAL/VERTICAL WITH INDEX PLATES		$2,585.00
10-181-1125	ROTARY TABLE; 12” DIAMETER HORIZONTAL/VERTICAL WITH INDEX PLATES		$3,349.00

10-180-1121	TAILSTOCK FOR 10” TABLE		$1,770.00
10-182-1126	TAILSTOCK FOR 12” TABLE		$1,858.00

10-149-1140N-ASSY-A

PRECISION-SLOTTING ATTACHMENT, STROKE: 5” (125 MM); 5/8” TOOL CAPACITY. 3 SLOTTING BARS (6MM, 8MM, 10MM) FLANGE A MOUNTING KIT • •

$5,371.00

 

10-164-1100

AUTO LUBRICATION SYSTEM RECOMMENDED FOR BALL SCREWS

$1,950.00

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on Twitter, Facebook, Youtube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/