28.62″ x 42.12″ New Femco CNC Lathe Model HL-55NT/1250

Description

The New Femco CNC Lathe Model HL-55NT/1250 is designed to meet the demands of heavy cutting and interrupted cuts and give long term accuracies with excellent surface finishes. Stringent manufacturing processes and a rigid design is combined with advanced state of the art technology to give a cost effective solution to your turning needs.

28.62″ x 42.12″ New Femco CNC Lathe Model HL-55NT/1250 Specifications:

The New Femco CNC Lathe Model HL-55NT/1250 Bed is designed to have a 45 degree slant important to give a minimum tool tip over hang and maximum rigidity. The bed is a solid one-piece casting both the saddle and tailstock ways are in the same plain thus eliminating thermal distortion. Heavily ribbed in strategic locations determined by computer finite analysis assures consistent accuracy’s and excellent finishes.

Guideways are wide wrap around box designed for long term accuracy and rigidity. The ways are widely spaced for greater rigidity and stability. All ways are induction hardened and are ground true to the axis planes. The mating surfaces are lined with turcite providing excellent wear and slip stick characteristics due to its low coefficient of friction. Turcite reacts with the structure giving good vibration damping and high static and dynamic stiffness.

The Headstock is a precision machined close grain meehanite casting assuring precise alignment of the critical spindle bores. Mounted on the same plain as the tailstock to ensure perfect alignment and center height without being affected by the bed temperature. The spindle is supported by two double row cylindrical roller bearings and duplex angular contact thrust bearings. All spindle bearings are precision class P4 (AFBMAB7) and are permanently grease lubricated.

FEMCO rates clamping force at 1899 radial foot pounds of force from the turret center line to the tool tip. This is the actual force applied during cutting. A large Curvic Coupling provides the rigidity for long tool life and high surface finishes. Turret indexing is non-stop bi-directional, with a .9 second index time. Turret repeatability is .001 of a degree. The extra wide 12 station turret with a 4 inch width for longer boring bar support.  The large turret is interference free for a 15” chuck and is flexible for left or right handed ID or OD tool layouts. 

Both the X and Z Axes are driven by double nut High Precision Ground Ball Screws. Both the ball screws are supported on both ends by angular contact thrust bearings. This double support design assures excellent positioning accuracy and repeatability and minimizes thermal growth. Both axes are driven by Fanuc AC digital drives and motors providing long term accuracy.

The coolant is delivered through a high-volume centrifugal pump to the turret. The system is designed to provide Coolant on the Tool or Through the Tool.

28.62″ x 42.12″ New Femco CNC Lathe Model HL-55NT/1250 Features:

• High Speed 2500 RPM Spindle
• Extra Wide 12 Station Bi-Directional Turret
• Large Bar Capacity
• Fast 630/787 IPM Rapid Traverse
• Powerful Fanuc 30/35 HP. Motor
• Solid Wrap Around Box Ways
• Big Bore 15” Chuck Standard
• 45 Degree Slant Bed
• Large 28.62” Swing Over Bed

28.62″ x 42.12″ New Femco CNC Lathe Model HL-55NT/1250 Software:

• Simultaneously Controllable Axis-Two
• Tape Storage Length 1280 meters
• Registerable Programs 63
• Minimum Programmable Increment 0.0001
• Backlash Compensation
• Self Diagnostic Functions

• G00 Positioning Rapid 
• G01 Linear Interpolation
• G02,G03 Circular Interpolation
• G4-.G41,G42 Tool Nose Radius Compensation
• G70 to G76 Multiple Repetitive Cycles
• G90,G92,G94 Canned Cycles
• G27 to G30 Reference Point Return
• G17,G18,G19 Plane Selection
• G20,G21 Inch/Metric Conversion
• G32 Thread Cutting
• G50 Coordinate System Setting Max. Spindle Speed
• G04 Dwell 
• G96,G97 Constant Surface Speed
• G98 Feed Per Minute
• G99 Feed Per Revolution 

• 8.4” Color LCD Monitor
• Background Editing
• 63 Stored Part Programs
• Manual Pulse Generator
• Tool Geometry & Wear Compensation (Offset)
• Tool Nose Radius Compensation
• Automatic Tool Offset
• 128 pairs of Tool Offsets
• Run Hour/ No. of Parts Display
• Clock Function
• Single Block
• Block Delete
• Dry Run
• Optional Stop
• Edit Lock  

• Fully Enclosed Work Area
• Door Interlock – Mechanical/Electrical
• Hydraulic Pressure Safety Switch
• Spindle Interlock
• Program Protect
• Chucking Signal
• Reinforced Doors
• Spindle Jog Function

28.62″ x 42.12″ New Femco CNC Lathe Model HL-55NT/1250 Standard Accessories:

• Fanuc Oi Controller
• Hydraulic Actuator with Draw Bar
• Hydraulic System
• 12 Station Turret
• Coolant System
• Automatic Lubrication System
• Work Light
• Tool Box with necessary Operating Tools
• Leveling Bolts and Plates
• Operation and Maintenance Manuals
• Parts List and Electronic Drawings
• One Year Machine Warranty
• Two Year Control Warranty
• Complete set of Tool Holders for Turret including:
  • 4 pcs 2” Boring Bar Holder
  • 2 pcs 1-1/2” Boring Bar Holder
  • 2 pcs 1” Boring Bar Sleeve
  • 2 pcs 3/4” Boring Bar Sleeve
  • 1 pc 5/8” Boring Bar Sleeve
  • 1 pc 1/2” Boring Bar Sleeve
  • 1 Morse Taper #3
  • 3 pcs O.D. Tool Holders
  • 1 pc Face Cutting Tool Holder

28.62″ x 42.12″ New Femco CNC Lathe Model HL-55NT/1250 Optional Accessories:

About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on Twitter, Facebook, Youtube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/