Description
28″ x 16″ x 17″ New Hardinge Bridgeport V-Series Vertical Machining Center Model V710 #40 Specifications:
Travel | |
---|---|
X-Axis Travel | 27.95″ |
Y-Axis Travel | 15.75″ |
Z-Axis Travel | 16.9″ |
Spindle Nose to Table Surface | 5.9-22.83″ |
Table Front End to Door | 5.9″ |
Spindle Center to Column | 16.89″ |
Table | |
Table Dimension | 23.62″ x 15.75″ |
Weight on Table (Max.) | 300kg |
T-Slots (Width x No. x Pitch) | 0.55″ x 3 x 4.92″ |
Spindle | |
Motor Rating (Max.) | 10 hp/7.5 kW (S3 25%) |
Spindle Speed (Max.) | 10,000 RPM up to 12,000/15,000 RPM optionally |
Torque (Max.) | 47.7 N-m |
Tapping Speed (Max.) | 3,000 RPM |
Spindle HP | 5.5/7.5 kW (Fanuc) (Contin./30 min) |
Spindle Taper | #40 BIG-PLUS |
Ball Screw | |
Diameter | 32 |
Feed Rates (All Axes) | |
Rapid and Traverse Rate | 36 m/min |
Cutting Feed Rate (Max.) | 12 m/min |
Tool Changer | |
Tool Capacity | 16 (Carousel-Standard) 20 (Swing Arm-Option) |
Tool Selection | Bi-Directional |
Tool Holder Type | BT or CAT or SK or ANSI 40 |
Tool DIameter Max. (Carousel Type) | 94 (Full) 130 (Adj. Pockets Empty) |
Tool Diameter Max. (SA ATC Type) | 75 (full) 150 (Adj empty) |
Tool Length Max. (Carousel Type) | 9.84″ |
Tool Length Max. (SA ATC Type) | 7.28″ |
Tool Weight Max. (Carousel Type) | 6 kg |
Tool Weight Max. (SA ATC Type) | 7 kg |
Tool Change Time (Avg.) (Carousel Type) | 5.5 (C-C 7.5) sec |
Tool Change Time (Avg.) (SA ATC Type) | 2 (C-C 4) sec |
Tool Changer | 20 Tools |
Accuracy (ISO 230-2) | |
Positioning (All Axes) | 0.010 mm |
Repeatability | 0.005mm |
Motors | |
Axis Motor Rating | 1.8 kW |
Coolant & Flush Motor | 0.52 kW |
Lubrication | |
Spindle Bearing | Grease |
Linear Guideways | Grease |
Ball Screw | Grease |
Coolant Capability | |
Coolant Tank Capacity | 170 liter |
Chip Flush Rate | 40 liter/min |
Miscellaneous | |
Compressed Air Reg. (Min.) | 70 psi, 5 kg/cm2 |
Power Supply Requirement | 52A FLA / 220V / 3 Phase |
Working Surface | 31.49″ x 15.74″ |
Control Type Option | Fanuc Oi-MF Siemens 828D |
Approximate Machine Weight | 8,613 lbs |
Floor Space (L x W x H) | 101.3″ x 111.3″ x 104.7″ |
28″ x 16″ x 17″ New Hardinge Bridgeport V-Series Vertical Machining Center Model V710 #40 Equipped With:
Hardinge Precision Spindle
- Dual contact, 40 taper, 10,000-rpm grease lubricated spindle powered by a direct drive, Fanuc spindle motor.
- Optional 12,000-rpm / 15,000-rpm Oil-Air Spindle.
- High tool retention for aggressive cutting applications. (900kgf/8,820N)
- BIG-Plus dual contact spindle that provides a stiffer interface between the spindle and the tool holder along with minimum run out on extended tools and better overall repeatability.
High Rigidity Structure
- The ATC mount is designed to properly support the ATC’s weight by putting the force directly into the column for superior stability, rigidity and minimized vibration to the cutting zone.
- The Z & Y-axis utilizes 45mm ball-guides. The Z-axis features (3) trucks per guideway and the Y-axis, (2) trucks per guideway. The X-axis features (2) 35mm ball-guides with (2) trucks per guideway.
- This heavy duty guideway system ensures a very stiff, rigid and durable machine providing years of low maintenance, high accuracy and superior surface finishes.
- Robust “C-frame” fixed column design from the popular XR machine family.
- Strategically ribbed base, column, and spindle carrier for increased rigidity and stiffness during demanding machining applications.
- Includes scraping of column & base joint for improved overall stiffness and rigidity.
- Robust class #3, 45mm diameter, 12mm or 16mm pitch, double-nut ballscrews are featured in the X, Y and Z-axis.
- Fixed, pre-tensioned (0.04mm) ballscrews minimize thermal growth, enhance rigidity, stability, and precision of the machine.
- Each axis features (5) bearings per ballscrew. (3) bearings/set at motor side, (2) bearings/set at end side.
Machine Lubrication
- V1000 utilizes Manual Centralized Grease Lubrication for all ballscrews and linear guides for extended component life. Optional Auto Grease Lubrication is also available.
Tool Probe (Optional)
- Automatic Renishaw Tool Probe, easy to use and define tool offset combined with macro programming. Reduce non-cutting cycle time and easily check tool length, diameter or wear.
Higher Efficiency
- Faster machining duty cycle time, lower non-cutting time.
- Spindle motor 3.7/5.5/9.0 kW 15,000 rpm direct drive with Max. torque 28.7 Nm at base speed.
- Fanuc axial servo motor 1.6 kW on X, Y Axes, 3kW on Z Axis.
- Rapid traverse feed, max. rapid and job 48m/min.
- Max. rigid tapping speed 6,000 rpm.
- Acceleration reaches 1.0G on X, Y Axes and 0.8G on Z Axis.
Rigid Structure
- Longer tool life and higher heavy cutting ability
- FEA (Finite Element Analysis) techniques were used to design and rigid, structurally-balanced machine to assure optimum rigidity and life.
- Two linear guideways on X Axis and two guide trucks per guideway. The Y and Z Axes feature two linear guideways with two heavy-duty guide trucks, per guideway.
- Ground ballscrew features low noise, low thermal growth and heavy-duty transmission.
- Low inertia coupling connect between ballscrews and axial servo motor directly.
- Rigid, C-frame fixed column design. Spindle carrier, column and base are manufactured from high-quality cast iron, contributing to overall rigidity and machine capabilities.
Excellent and Stable Accuracy
- Stable static and cutting accuracy
- Accurate Positioning Accuracy ISO230-2: Full stroke positioning accuracy 0.01mm
- Accurate Positioning Accuracy ISO230-2: Full stroke positioning accuracy 0.005mm
- Ball-Bar contouring test and laser compensation for each machine to ensure geometric and cutting accuracy
- Superior cutting capability
Coolant Tank and Motor
- 170 liter coolant tank capacity plus chip screens ensure good coolant flow. High-volume coolant chip flush system surround enclosure and auger type chip conveyor as optional allows chip evacuation on way covers and enclosure into chip pans.
28″ x 16″ x 17″ New Hardinge Bridgeport V-Series Vertical Machining Center Model V710 #40 Controls:
Fanuc OiMF Control Features
- 10.4″ LCD Color Display
- Linear / Circular / Helical Interpolation
- Programmable Data Input
- PCMCIA Card Slot
- Workpiece Coordinate System
- Manual Pulse Generator (Handwheel)
- Coordinate System Rotation
- Rigid Tapping
- Tool Life Management
- Tool Length compensation
- Background Editing
- Ethernet Ready / RS232 Ready / USB Slot
- Additional Workpiece
- Coordinate System
- Manual Guide i
Siemens 828D Control Features
- 10.4″ Color Display
- RJ45 Ethernet Port / Network Drive
- USB 2.0
- Compact Flash (CF) interface
- Intuitive Jog Mode
- Tool and Workpiece Measurement
- Intuitive & Transparent Tool Management
- Graphical Interactive Programming & Operation
- Mold Making Quick Viewer
- Transformation – Cycle800
- MDynamics – Mold & Die
- Technology Package
28″ x 16″ x 17″ New Hardinge Bridgeport V-Series Vertical Machining Center Model V710 #40 Options:
- Coolant Through Spindle 280 psi (20 Bar)
- Chip Flush System
- 4th Axis Rotary Tables
- Chip Wash Down Hose
- Siemens 828D Controller
- 10K RPM Direct Drive Spindle (#40)
- 12K RPM Direct Drive Spindle (#40)
- 15K RPM Direct Drive Spindle (#40)
- Chip Conveyor: Auger Type / Hinge Type / Scraper Type
- Z Axis Column Rasier 200mm
- Tool Probe / Pre-Wiring
- Part Probe / Pre-Wiring
- Fast Ethernet Interface + D/S 2GB Memory Card
- AICCII (Pre-read 200 Blocks)
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.