Description
28” x 28” New Hyd-Mech Automatic Dual Post Horizontal Band Saw Model H-28A Specifications:
Capacity | |
90° rectangle (h x w) | 28″ x 28″ |
90° round | 28″ |
90° square | 28″ |
6° canted head rectangle (h x w) | 24″ x 28″ |
6° canted head round | 24″ |
6° canted head square | 24″ |
Blade Drive | 10 HP |
Blade Speed | 40-300 SFM |
Blade Size | 2″ x 25′ |
Automatic Multi-Indexing | 0-34″ |
Table Height | 31″ (37″ w/ canted head) |
Voltages Available | 480 v (208, 240, 575v Optional Power transformer required) |
Weight | 18,000 lbs |
Dimensions (w x l x h) | 161″ x 92″ x 120″ |
Coolant Tank Capacity | 40 Gallons |
Hydraulic Tank Capacity | 9.5 Gallons |
Standard Features:
- One piece design – no alignment necessary
- Spilt front vise (can be replaced by request with retractable datum vise at no charge)
- Shuttle features automatic multi-indexing up to 34” in a single stroke with automatic kerf compensation.
- Steel guide arms. The idler side guide arm is mechanically connected to the front vise moveable jaw for proper guide arm spacing at all times.
- 10 HP VFD. True direct blade drive – no belts/pulleys
- Full capacity, full stroking hydraulic vises
- Robust steel base
- Blade chamber separates material from cut part
- Hydraulic positive down feed
- High resolution feed rate valve allows for constant feed rate when cutting special alloys
- Cast iron band wheels
- 7” Mitsubishi FX5U PLC color touch screen controller. No flipping from screen-to-screen, the control is interactive with messages for the operator that reduces the learning curve. Programmable head up position, Built in machine diagnostics on the display screen, Simple Software updates, 999 jobs, 10 jobs in queue.
- Replaceable blade brush
- Automatic chip removal auger
- Easy access electrical panel and hydraulics
- Blade breakage switch
- Hydraulic band tensioning with digital readout
- 5 HP hydraulic pump provides system pressure
- Hydraulic carbide guide tensioning
- Hardened, replaceable wear plates
- Safety door interlocks
- Flood coolant with wash down hose
- Work light
- Out of stock switch
- Variable vise pressure
28” x 28” New Hyd-Mech Automatic Dual Post Horizontal Band Saw Model H-28A Optional Features:
- Full capacity hydraulic overhead bundling
- 6° canted head
- Blade deviation
- Mist lubrication
- Outboard vise clamping options available upon request
- Remote console – 15’ cord
- Roller discharge table
- Vertical alignment rollers
- Laser light
- Idler conveyors
- Powered conveyors
- Power transformer
28” x 28” New Hyd-Mech Automatic Dual Post Horizontal Band Saw Model H-28A Optional Accessories:
13133020 6° canted head (Changes table height to 37”) | $7,900 |
13093000 Full capacity hydraulic overhead bundling – two vises | $8,200 |
13138010 Mist lubrication system (shop air required) | $1,900 |
13137050 Laser light | $1,600 |
Power Transformer- change in house power from 480 v to 208 v |
$1,700 |
Power Transformer- change in house power from 480 v to 240 v |
$1,700 |
Power Transformer- change in house power from 480 v to 575 v |
$1,700 |
13137030 Remote console – 15’ cord | $5,100 |
13094000 Roller discharge table | $6,200 |
13099010 Vertical alignment rollers – on machine | $1,800 |
13137010 Blade deviation monitor | $4,100 |
Idler conveyors-Standard head (36″W x 31″H)
|
|
18030361 Type 3 – 5’ in feed/ out feed idler conveyor | $6,500 |
18030362 Type 3 – 10’ in feed/ out feed idler conveyor | $12,500 |
Idler conveyors-Canted head (36″W x 37″H)
|
|
18038470 Type 3 – 10’ in feed/ out feed idler conveyor | $12,500 |
Powered conveyors-Standard head (36″W x 31″H) | |
18030364 Type 3 – 10’ in feed/ out feed powered conveyor | $19,900 |
18099782 Additional 10’ power add on section | $13,900 |
18092000 Pneumatic clutch | $4,100 |
Powered conveyors-Canted head (36″W x 37″H) | |
18030366 Type 3 – 10’ in feed/ out feed powered conveyor | $19,900 |
18099787 Additional 10’ power add on section | $13,900 |
18092000 Pneumatic clutch | $4,100 |
Accessories for both idler and powered conveyors
|
|
18099093 Filler plates – for 5’ conveyor | $1,900 |
18099094 Filler plates – for 10’ conveyor | $3,800 |
18099084 Coolant drip pan – for 5’ conveyor | $1,800 |
18099083 Coolant drip pan – for 10’ conveyor | $3,600 |
18099080 Vertical alignment roller | $2,200 |
18099095 Fork lift cut outs | $2,200 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.