Description
This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting.
30″ x 60″ New Sharp Lathe Model 3060B Specifications:
| CAPACITY | |
| Swing Over Bed | 30″ |
| Swing Over Cross Slide | 21″ |
| Center Height | 15″ |
| Swing Over Gap | 39″ |
| Distance Between Centers | 60″ |
| HEADSTOCK | |
| Spindle Nose Type | D1-11 camlock |
| Spindle Bore | 4.5″ |
| Spindle Speeds (12) | 10 – 1,000 rpm (12 steps) |
| Taper of Spindle Bore | MT #7 |
| Taper of Center | MT #5 |
| THREADS AND FEEDS | |
| Longitudinal Feeds – in/rev (18) | 0.0022 – 0.032″ |
| Cross Feeds – in/rev (#) | 0.0026 – 0.035″ (17) |
| Inch Threads (#) | 2 – 56 tpi, (44) |
| Metric and Module Threads (#) | 0.5 – 14 mm (24) |
| D.P. Threads (36) | 4 – 56 mm |
| Leadscrew Pitch, Diameter | 4 tpi, 1-1/2″ |
| CARRIAGE | |
| Cross Slide Travel | 14.75″ |
| Compound Rest Travel | 7.8″ |
| Compound Width | 6″ |
| BED | |
| Bed Width | 15-3/4″ |
| Bed Length | 110″ |
| TAILSTOCK | |
| Quill Travel (graduated) | 6-1/2″ |
| Quill Diameter | 3″ |
| Quill Center Taper | MT #5 |
| GENERAL | |
| Spindle Motor (220V or 440V, 60, 3) | 15 HP |
| Net Weight (approx.) | 5,962 lbs |
| Dimensions (L x W x H) | 118″ x 45″ x 77″ |
| Standard Color | Gray |
| ELECTRICAL | |
| Voltage | 230 & 460 |
| Phase | 3 phase |
| TOTAL POWER CONSUMPTIONS | |
| 230V | 16 KVA/45 amps |
| 460V | 16 KVA/22.5 amps |
30″ x 60″ New Sharp Lathe Model 3060B Features:
- D1-11 camlock
- 4.5” spindle bore
- Direct selection for inch / metric threads
- One piece cast Meehanite bed
- Quick change gearbox
- 15 HP motor
- 12-speed gear head (10-1,000 rpm)
30″ x 60″ New Sharp Lathe Model 3060B Standard Accessories:
- 4-jaw 16″ chuck
- Coolant system
- 4 way tool post
- Halogen work light
- Face plate 20″
- Steady rest (4″ – 11.5″)
- 4-way carriage stop
- Splash guard
- 16″ chuck guard
- Tailstock
- Follow rest (1.57″ – 6.3″)
- Wired 230V or 460V. Please specify.
- Tool kit: Machine manual, half nut wrench, 17m and 19m wrenches, set of 6 Allen wrenches, Phillips-head screw driver, flat head screw driver, oil can, grease gun, rear way cover bracket, 2 sets of dead center, pin for indicator, can of paint
30″ x 60″ New Sharp Lathe Model 3060B Optional Accessories:
| 803-1239 3-jaw chuck 12″ D1-11 (Bison) – 4.05″ Bore | $2,580.00 |
| 803-1639 3-jaw chuck 16″ D1-11 (Bison) – 5.34″ Bore | $4,630.00 |
| 853-1639 4-jaw chuck 16″ D1-11 (Bison) | $2,550.00 |
| 3J15D11 3-jaw chuck 15″ D1-11 (QU) | $2,410.00 |
| 4J16D11 4-jaw chuck 16″ D1-11 (QU) | $1,715.00 |
| 991126-22 Taper attachment (factory order) | $4,015.00 (factory installed) |
| 22/30B-D/A Drill & arbor (JACOBS) | $770.00 |
| CA-2511-7350 Quick change tool holder (Aloris) 7 pcs | $2,295.00 |
| 10855 Live center – Royal (dual bearing) MT#5 | $445.00 |
| LC-MT5 Live center – MT#5 | $200.00 |
| CCD1-11 5C collet closer (Atlas) | $2,215.00 |
| ACC-5C 5C collet set (1/8″ to 1/16″ by 1/16″) 16 pcs | $340.00 |
| 20C-02 Micrometer carriage stop | $290.00 |
| 30B-STEADY20 Steady rest 19.5″ (10.8″ – 18.9″) | $3,525.00 |
| 30B-STEADY15 Steady rest 15″ (6.7″ – 15.2″) | $2,890.00 |
| 26C-RJAW Roller jaws set (3 pcs) | $1,090.00 |
| 22B-04 Chuck guard with limited switch (factory order only) | $470.00 |
| G 2240 Tool guard with limited switch (factory order only) | $1,955.00 |
| LSG-2240 Lead screw guard (factory order only) | $1,170.00 |
| GBS-2240 Guard behind spindle (factory order only) | $50.00 |
| UL/CSA 2240 UL/CSA switch board/UL motor/CSA pump in lieu of regular version (factory order only) | $1,800.00 |
30″ x 60″ New Sharp Lathe Model 3060B Digital Readout Systems:
| FG-3060 Fagor 20i DRO | $4,075.00 (installed) |
| FG-40i-3060 Fagor 40i DRO | $5,160.00 (installed) |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
