Description
6” x 18” Clausing Lathe Precision Model CT618VST Specifications:
| Spindle Capacity | |
| With chuck | 6” |
| With expanding collets | 3” |
| With round 5C collets | 1-1/16” |
| With hexagon 5C collets | 7/8” |
| With square 5C collets | 3/4” |
| With step chuck | 1-1/16″ – 6″ |
| Capacity | |
| Swing over bed | 9″ |
| Swing over carriage | 7″ |
| Swing over cross slide | 5″ |
| Center distance | — |
| Headstock | |
| Spindle nose diameter | 2.185″ |
| Spindle nose I.D./O.D. | 5C (10º) / 4º taper |
| Spindle speeds (variable) | 50-4000 RPM |
| Inverter spindle motor | 3 Hp |
| Hole through spindle | 1-1/4″ |
| Bar stock diameter (5C collet) | 1-1/16″ |
| Carriage | |
| Cross slide travel | 3.7″ |
| Carriage power feed range | n/a |
| Cross slide power feed range (variable) | n/a |
| Quick action compound slide travel | n/a |
| Compound slide travel X/Z | — |
| Turret (6 STA) | |
| Travel | 3.7″ |
| Coolant | |
| Coolant pump | 1/8 Hp |
| Dimensions | |
| Net weight (approx.) | 990 lbs |
| Machine (L x W x H) | 69″ x 28″ x 63″ |
| Shipping weight (approx.) | 1,364 lbs |
| Shipping (L x W x H) | 79″ x 38″ x 73″ |
6” x 18” Clausing Lathe Precision Model CT618VST Features:
- Spindle run out within 50 millionths of an inch.
- Six station indexing turret on tailstock end.
- Hardened and precision ground spindle mounted on high-precision preloaded angular contact ball bearings maximizes rigidity and sustained precision.
- 3 Hp infinitely variable spindle speed provides desired speed on demand.
- High/Low speed quick change lever for convenience.
- Fast lever collet closer allows chucking with one single movement.
- Independent electric variable feeds for carriage and cross slide provide freedom of operation.
- Hardened and precision ground alloy steel bed ways resist wear.
- Turcite-B slideway bearing surface between carriage and bed.
- Double tool cross slide for many practical applications.
- CE Electrics with plastic interlocking chuck guard.
- Standard machine voltage 230/3/60 (other voltages require a transformer)
Optional Equipment:
| CTL-001 Transformer for 460/3/60 voltage | $435.00 |
| CTL-001A CSA electrics for Canada w/Interlock Chuck Guard (Replaces CE Electrics) | $1,025.00 |
| CTL-002 5C step chuck 2″ regular depth cap. (requires CTL-002A) | $230.00 |
| CTL-003 5C step chuck 3″ regular depth cap. (requires CTL-003A) | $275.00 |
| CTL-004 5C step chuck 4″ regular depth cap. (requires CTL-004A) | $315.00 |
| CTL-005 5C step chuck 5″ regular depth cap. (requires CTL-005A) | $360.00 |
| CTL-006 5C step chuck 6″ regular depth cap. (requires CTL-006A) | $395.00 |
| CTL-002A 5C step chuck closer 2″ regular depth cap. – taper for CTL-002 | $170.00 |
| CTL-003A 5C step chuck closer 3″ regular depth cap. – taper for CTL-003 | $185.00 |
| CTL-004A 5C step chuck closer 4″ regular depth cap. – taper for CTL-004 | $200.00 |
| CTL-005A 5C step chuck closer 5″ regular depth cap. – taper for CTL-005 | $230.00 |
| CTL-006A 5C step chuck closer 6″ regular depth cap. – taper for CTL-006 | $235.00 |
| CTL-002B 5C step chuck 2″ extra depth cap. (requires CTL-002C) | $245.00 |
| CTL-003B 5C step chuck 3″ extra depth cap. (requires CTL-003C) | $295.00 |
| CTL-004B 5C step chuck 4″ extra depth cap. (requires CTL-004C) | $335.00 |
| CTL-005B 5C step chuck 5″ extra depth cap. (requires CTL-005C) | $375.00 |
| CTL-006B 5C step chuck 6″ extra depth cap. (requires CTL-006C) | $410.00 |
| CTL-002C 5C step chuck closer 2″ extra depth cap. – taper for CTL-002B | $190.00 |
| CTL-003C 5C step chuck closer 3″ extra depth cap. – taper for CTL-003B | $205.00 |
| CTL-004C 5C step chuck closer 4″ extra depth cap. – taper for CTL-004B | $220.00 |
| CTL-005C 5C step chuck closer 5″ extra depth cap. – taper for CTL-005B | $245.00 |
| CTL-006C 5C step chuck closer 6″ extra depth cap. – taper for CTL-006B | $275.00 |
| CTL-007 5″ 3-jaw chuck & CTL-023 | $885.00 |
| CTL-007A 5″ 3-Jaw chuck & CTL-023 heavy duty | $1,170.00 |
| CTL-008 6″ 4-jaw chuck & CTL-023 | $1,085.00 |
| CTL-009 6″ 3-jaw chuck & CTL-023 | $1,125.00 |
| CTL-009A 6″ 3-jaw chuck & CTL-023 heavy duty | $1,300.00 |
| CTL-010 6″ 6-jaw chuck & CTL-023 | $1,400.00 |
| CTL-012 Threaded positive stops (solid stop) | $70.00 |
| CTL-013 Threaded positive stops (ejector stop) | $85.00 |
| CTL-014 Threaded positive stops (long stop) | $110.00 |
| CTL-015 Universal collet stop | $140.00 |
| CTL-016 Plug chuck | $70.00 |
| CTL-017 5C collet fixture plate (3-3/8″ dia.) | $175.00 |
| CTL-018 5C collet fixture plate (4-3/8″ dia.) | $190.00 |
| CTL-019 3″ spindle nose fixture plates (taper) | $175.00 |
| CTL-020 5″ spindle nose fixture plates (taper) | $205.00 |
| CTL-021 8-7/8″ spindle nose fixture plate (taper) | $310.00 |
| CTL-022 7″ slotted and taper face plate (taper) | $435.00 |
| CTL-023 Fixture plate (taper) | $260.00 |
| CTL-024 Angle plate | $150.00 |
| CTL-029 Fine turning chuck w/CTL-028 back plate | $1,450.00 |
| CTL-030 Expanding collet pads | $770.00 |
| CTL-031 Soft jaws | $100.00 |
| CTL-036 Knurling holder .314″ (no tools pick 036B, C, or D) | $220.00 |
| CTL-036A Knurling holder .472″ (no tools pick 036B, C, or D) | $220.00 |
| CTL-036B Knurling tool – cross 45deg (requires CTL-036 or 036A) | $190.00 |
| CTL-036C Knurling tool – diamond 30deg (requires CTL-036 or 036A) | $200.00 |
| CTL-036D Knurling tool – stripe (requires CTL-036 or 036A) | $140.00 |
| CTL-040 Tool setting gauge | $85.00 |
| CTL-047A Radius turning attachment | $2,685.00 |
| CTL-051A Vertical cut-off slide | $1,175.00 |
| CTL-057 Electronic magnifier lamp | $465.00 |
| CTL-058 5C imperial collet EA (sizes 1/16 – 7/8 state sizes desired) | $75.00 |
| CTL-058-SET 5C Imperial collet Set 1/8 to 7/8 (7 pcs) | $450.00 |
| CTL-058M 5C metric collet EA (sizes 1-27mm state sizes desired) | $75.00 |
| CTL-059 Chip coolant shield | $1,335.00 |
| CTL-140 Quick change adjustable holder | $215.00 |
| CTL-145 Extension tool holders – 48 | $100.00 |
| CTL-145A Extension tool holders – 49 | $115.00 |
| CTL-145B Extension tool holders – 50 | $130.00 |
| CTL-145C Extension tool holders – 51 | $140.00 |
| CTL-150 Adjustable holder | $100.00 |
| CTL-155 16C collet type M3, 4, 5, 6, 8,10, 12 set | $610.00 |
| CTL-160 Releasing tap holder 16C collet type | $340.00 |
| CTL-165 Knee tool | $175.00 |
| CTL-170 Multiple tool holder – front | $200.00 |
| CTL-175 Multiple tool holder – rear | $200.00 |
| CTL-180 Centering and facing tool | $295.00 |
| CTL-185 Releasing tap holder | $375.00 |
| CTL-190 Releasing die nut holder | $375.00 |
| CTL-195 Tool holder extension | $100.00 |
| CTL-200 Adjustable rotary stops | $140.00 |
| CTL-205 Slide tool | $500.00 |
| CTL-210 Quick acting release tool | $500.00 |
| CTL-235 Straight & taper turn slide for CTL-230 | $925.00 |
| CTL-240 Compound slide | $2,555.00 |
| CTL-245 Tail stock for second operation machines | $1,930.00 |
| CTL-250 End working slide | $2,250.00 |
| Six Station Turret Tooling | |
| CTL-045-9 Adjustable holder (for 6 station turret) | $135.00 |
| CTL-045-10 16C Collets for CTL-045-11 (M3, 4, 5, 6, 8, 10, 12) State Size (for 6 station turret) | $125.00 ea |
| CTL-045-11 Releasing tap holder collet type uses CTL-045-10 | $340.00 |
| CTL-045-13 Centering and facing tool (for 6 station turret) | $325.00 |
| CTL-045-15 Releasing die nut holder (for 6 station turret) | $405.00 |
| CTL-045-16 Tool holder extension (for 6 station turret) | $135.00 |
| CTL-045-17 Adjustable rotary stops (for 6 station turret) | $175.00 |
| CTL-045-18 Slide tool (for 6 station turret) | $530.00 |
| CTL-045-19 Quick acting recessing tool (for 6 station turret) | $530.00 |
| CTL-120 1/4″ Drill chuck adapter JT#1 CTL-032 (for 6 station turret) | $75.00 |
| CTL-120A 3/8″ Drill chuck adapter JT#2 CTL-033 (for 6 station turret) | $75.00 |
| CTL-120B 1/2″ Drill chuck adapter JT#3 CTL-034 (for 6 station turret) | $75.00 |
| CTL-120C 1/2″ Drill chuck adapter JT#6 CTL-035 (for 6 station turret) | $75.00 |
Clausing Warranty:
Clausing warrantees the machine for a period of one year from the date of shipment. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.