Description
8″ x 16″ New Hardinge Slant Bed CNC Lathe Model Talent TT51 Specifications:
| Capacity | |
| Spindle Nose Configuration | A2-6 |
| Draw Tube Type | Hydraulic |
| Maximum Swing Over Way Cover | 8.07″ (205mm) |
| Through Draw Tube Capacity | 2.047″ (52mm) |
| Part Weight w/ Chuck (Fixture) | 75 lb (34 Kg) |
| Machining Dia. – Max-Turret-Upper | 8.252″ (218mm) |
| Machining Dia. – Max-Turret-Lower | 7.795″ (198mm) |
| Turning Length – Max-Turret-Upper (With Collet Adaptation Chuck) | 16.102″ (409mm) |
| Part Accuracy | |
| Roundness | 0.00008″ (2 micron) |
| Surface Finish Ra | 0.00003″ (0.8 micron) |
| Total Part Variation on Dia | 0.0006″ (15 micron) |
| Main Spindle/Head | |
| Type | Belted |
| Spindle Nose | A2-6 |
| Spindle Hole Thru | 2.57″ (65.5mm) |
| Front Bearing Bore | 90mm |
| Motor (FANUC) Standard | Fanuc αi I 8/8000 |
| Max Speed/Base Speed | 5000/992 rpm |
| Power @ Spindle (Continuous) | 10.1 HP (7.5 Kw) |
| Power @ Spindle (30 Min) | 14.9 HP (11 Kw) |
| Torque @ Spindle (Continuous) | 53.1 ft/lb (72.2 Nm) |
| Torque @ Spindle (30 Min) | 77.4 ft/lb (105.8 Nm) |
| Belt Drive Ratio (Motor/Spindle) | 1:51:1 (65:43) |
| Slides | |
| Z1, Z2 Axis, FANUC | N/A |
| Travel Z | 20″ (508mm) |
| Rapid Traverse Z | 1574 in/min (40m/min) |
| Axis Thrust Z (Max) | 1525 lbs (6785 N) |
| Drive Ratio | 1:1 |
| X, X2 Axis, FANUC | |
| Travel X | 5.629″ (143mm) |
| Travel X2 | 5.236″ (133mm) |
| Rapid Traverse X, X2 | 944 in/min (24m/min) |
| Axis Thrust X, X2 (Max) | 5241 lbs (11309 N) |
| Drive Ratio X | 1:1 |
| Drive Ratio X2 | 1:1 |
| Y Axis, FANUC | |
| Travel Y | 1.181″ (± 30mm) |
| Rapid Traverse Y | 944 in/min (24m/min) |
| Axis Thrust Y (Max) | 5241 lbs (11309 N) |
| Drive Ratio | 1:1 |
| X, X2, Z, Z2, Y Axis | |
| Position Accy/Total Travel (ISO 230-2) | 0.0004″ (0.01mm) |
| Repeatability (ISO 230-2) | 0.0002″ (0.005mm) |
| Hydraulic Cylinder | |
| Type | Hydraulic |
| Stroke | 0.866″ (22mm) |
| Min Pressure | 42.6 psi (3 Kg/cm2) |
| Max Pressure | 568 psi (40 Kg/cm2) |
| Thru Hole Size w/ Draw Tube | 2.047″ (52mm) |
| Operating Force (Max) | 12,125 psi (5500 kgf) |
| Operating Force (Min) | 908 psi (412 kgf) |
| Machine Dimensions | |
| Spindle CL Height | 42.52″ (1080mm) |
| Length w/o Chip Conveyor | 144.45″ (3669mm) |
| Length w/ Chip Conveyor | 164.56″ (4180mm) |
| Width | 80.1″ (2034mm) |
| Height | 79.4″ (2018mm) |
| Weight | 16,500 lbs (7500 Kgs) |
| Required Floor Space | 91.51 ft2 (8.502 m2) |
| Base | |
| Material | Cast Iron |
| Slide Configuration | 60 Slant with Z On |
| Width of Ways (Carriage-Guide) | 14.53″ (369mm) |
| Weight of Base (Approx) | 5115 lbs (2325 Kgs) |
| Coolant Facilities | |
| Reservoir Capacity | 105 gal (400 L) |
| Turret/Top Plate | |
| Type | BMT45 |
| Clamp Method | Hydraulic |
| Index Motor | Servo Motor |
| Index Time Next Station (Unlock, Index & Lock) | 0.69 sec |
| Index Repeatability (Return to Same Station) | ±1.6 Arc Sec |
| Indexing Accuracy (Next Station) | ±4 Arc Sec |
| Rotating Toolholder Coupling | DIN 1809 (Tenon) |
| Number of Stations | 16 |
| Square Shank Size | 0.75″ (20mm) |
| Round Shank Size | 1.25″ (32) |
| Live Tool Motor (FANUC) Standard | |
| Motor | Fanuc α2/10000i |
| Max Speed | 5000 rpm |
| Max Torque | 17.5 ft/lb (23.8 Nm) |
| Max Tap Dia | 0.551″ (14mm) |
| Sub-Spindle | |
| Motor | Fanuc αi l 8/8000 |
| Type | Belted |
| Spindle Nose | A2-5 |
| Thru Hole | 2.204″ (56mm) |
| Max Speed/Base Speed | 6000/1152 rpm |
| Power @ Spindle (Continuous) | 10.1 HP (7.5 Kw) |
| Power @ Spindle (30 Min) | 14.9 HP (11 Kw) |
| Torque @ Spindle (Continuous) | 47.5 ft/lb (62 Nm) |
| Torque @ Spindle (30 Min) | 967.1 ft/lb (91 Nm) |
| Secondary Spindle Hydraulic Cylinder | |
| Type | Hydraulic |
| Stroke | 0.590″ (15mm) |
| Min Pressure | 3 Kg/cm2 |
| Max Pressure | 40 Kg/cm2 |
| Thru Hole Size w/ Draw Tube | 1.77″ (45mm) |
| Operating Force (Max) | 7054 psi (3200 kgf) |
| Operating Force (Min) | 529 psi (240 kgf) |
8″ x 16″ New Hardinge Slant Bed CNC Lathe Model Talent TT51 Standard Features:
- Multi-Axis Machining Operations
- 8 Axes for demanding production requirements
- Finish parts complete on the single machine in a single operation
- Reduced cycle times
- Enhanced features for superior performance
- Full Y axis capability on upper turret
- Twin Spindles with C Axis Capabilities
- Powerful 20 Hp main and secondary spindles
- Exacting part roundness, superior tolerance holding and part finishes
- Exact synchronization for part transfers
- Full C Axis contouring on both spindles
- Twin Turrets With Live Tooling Capabilities
- Twin 16 stations turrets
- All stations are live capable
- Industry standard BMT45 DIN 1809 tooling system
- Simultaneous machining for reduced cycle times
- One or both turrets can work on either spindle without limitations
- Heavy Duty Construction
- Highly rigid cast iron base
- Designed with FEA design analysis
- Modular construction
- Heavy duty ballscrews and linear guideways for maximum machine stiffness and overall machining consistency
8″ x 16″ New Hardinge Slant Bed CNC Lathe Model Talent TT51 Key Features:
- Key Advantages and Features of Utilizing a Twin Spindle/Twin Turret Multi-Tasking Turning Center
- Finish parts complete in one machine-less parts handling
- Reduced cycle times-two tools in the cut simultaneously
- Reduced work in process
- Reduced lead time for lean manufacturing and JIT delivery
- High volume production-long run batches or dedicated production of simple to complex components
- Wide range of process applications
- Easier processing of part families and less setups due to the large number of available tool stations and configurations
- Reduced setup time of the use of BMT industry standard tooling with very high repeatability
- Compact design requires less floor space than most competitors in its class
- Reduced labor costs-one operator can run multiple machines
- Full Y axis capability on upper turret
- Exclusive Features
- Both turrets can work on either or both spindles simultaneously
- Hand scrapped structural joints to increase contact
- Heavy duty linear guideways and ball screws
- Wide variety of spindle tooling is available
- Twin Spindles with C-Axis Contouring
- High strength, ductile cast iron headstock housings are hand scraped to the base for optimum stiffness, rigidity and vibration dampening
- Secondary spindle clamps the transferred workpiece for subsequent operations, can also be used as a tailstock with programmable torque control
- Large 3.54”/90mm front bearing bore provided excellent static and dynamic stiffness
- Low-inertia hydraulic disk brakes provide superior clamping power for live tooling operations
- Adjustable Hydraulic actuators for use with collets and jaw chucks
- Spindle bearings are protected with air purge and labyrinth seal systems
- Exacting part roundness and surface finish capabilities
- Less than 1μ
- Less than .8 μm Ra
- Twin precision spindles with ANSI A2-5” (TT42) or A2-6” (TT51) models and A2-5” on the secondary spindle
- Powerful spindle drive packages: 20 Hp (11Kw) on TT42 and TT51
- Up to 6,000 –rpm (TT42) and 5,000-rpm (TT51) speed range on both spindles allow exact synchronization for part transfers
- • High torque ratings: 68 ft-lbs (91Nm) on TT42
- A single timing style drive belt is used for power transmission from the spindle motor to the spindle
- Accurate part transfer – within .0005”(.012mm) between spindles
- C axis contouring with .001° degree positioning on both spindles for live tooling applications
- Large availability of spindle tooling from Hardinge, the world leader in work holding
- Flex C systems
- Collets and collet adaption chucks
- Expanding collet systems
- 3 jaw chuck systems
8″ x 16″ New Hardinge Slant Bed CNC Lathe Model Talent TT51 Machine Construction:
- Impressive 16,534lb (7500kg) Machine Weight: The design of the machine allows convenient placement in any shop while offering a wide range of functionality and capability.
- Machine Base: Heavy ribbed cast iron base with 60° slant bed offers excellent rigidity and vibration damping capabilities. 6 leveling feet (3 fixed and 3 adjustable) are supplied to support the machine base on the shop floor, there are additional support feet under the electrical cabinet to assist in supporting that structure.
- 60-Degree Slant Bed: Allows efficient chip removal. Use of water or oil based coolant is allowed.
- FEA (Finite Element Analysis): Techniques are used to design and build a more rigid, structurally-balanced machine to assure optimum fatigue life. Unique CAD so ftware accurately depicts the structural deflection, stress levels, thermal response and vibration response of the assembled components and the assembled machine. The most extreme case loadings are used to test adverse machining conditions.
8″ x 16″ New Hardinge Slant Bed CNC Lathe Model Talent TT51 Fanuc 0iTF Controls:
- General
- Two Pair of Interpolating Axes
- Inch/Metric Selection by G-Code
- Programmable Resolution 0.001″/0.001mm
- Tool Offset Capability 0.001″/0.001mm
- 2MB Part Program Storage
- Part Program Storage 1000
- Data Input/Output
- MDI (Manual Data Input) Operation
- Reader/Punch Interface (RS-232 Software/Hardware)
- Programming Functions
- Auto Coordinate Setting
- Axis Recomposition
- Background Editing
- Balanced Cutting
- Canned Cycles (Drilling)
- Chamfer/Corner Rounding
- Constant Surface Speed Programming
- Continuous Thread Cutting
- Coordinate System Setting (G50)
- Custom Macro B
- Decimal Point Programming
- Diameter Programming
- Direct Drawing Dimension Programming
- Exact Stop
- Expanded Stored Stroke Check
- Extended Part Program Edit
- Graphic Tool Path Display
- Helical Interpolation
- Input of Offset Value by Programming (G10)
- Multiple Repetitive Cycles I (Turning)
- Multiple Repetitive Cycles II (Pockets)
- Option Stop
- Program Number Search
- Reference Point Return
- Registered Programs (1000)
- Rigid Tapping
- Single Block Operation
- Spindle Synchronization
- Stored Stroke Check
- Thread Cutting
- Thread Cutting Cycle Retract
- Tool Life Management
- Tool Nose Compensation
- Polygon Turning
- Tool Post Interference Check
- Variable Lead Thread Cutting
- Operation
- Dry Run
- Dwell Time
- Emergency Stop
- Machine Lock
- Manual Feedrate Override (0 to 150%)
- Manual Pulse Generator
- Manual Rapid Traverse Override (Low-25-50-100%)
- Tool Geometry and Tool Wear Offsets (99 Pair Each)
- Miscellaneous
- Actual Feed Display
- C-Axis on Both Spindles
- Color LCD Display with Basic Keyboard (English Language)
- Color LCD Display with Basic Keyboard (French, German, Italian, or Spanish Language)
- Mechanical Run Meter
- On-Screen “HELP” Functions for Alarms
- Program Protected
- Run Time and Parts Counter
- Self-Diagnosis Function
- Spindle Load Meter
- Spindle Orient on Both Spindles
8″ x 16″ New Hardinge Slant Bed CNC Lathe Model Talent TT51 Twin Spindle/Twin Turret Multi-Tasking Turning Center:
- Oversized Wide Set Heavy Duty Linear Guideways: Standard on all axes for extra heavy loading. Separate rail systems are provided for the upper and lower turrets, carriage and secondary spindle. Linear ways produce minimal fraction for:
- Low heat and thermal growth
- Maximum static and dynamic stiffness
- Overall machining consistency
- Reduce cycle times
- Longer machine life
- Heavy Duty 1.259″ (32mm) Diameter Ball Screws: Oversize bearings and bearing supports are used on all machine axis and provide low stress, high static and dynamic stiffness, and long fatigue life. The double-nut ball screws are preloaded for maximum rigidity against thrust load. Ball screw mounts are recessed inside castings, providing minimal overhang and reduced torsional loads to the linear guides. Ball screws and linear guides are completely protected by telescoping steel covers.
- Automatic Grease Lubrication System: Used on all linear guides, ball screws and truck bearings — coolant contamination is virtually eliminated for improved coolant life. An operator prompt is displayed at the appropriate interval on the control.
- Twin Turrets with Live Tooling Capability
- Twin 16 station turrets can be used on either spindle or both spindles simultaneously.
- Every turret station is live capableHigh-speed bidirectional indexing (.69 second station to station) keeps non-cut time to a minimum
- Rigid turrets accurately lock into place within .000050” (.12μ)
- Easier processing of parts families and fewer setups due to large number of tooling stations
- Industry standard BMT-45 DIN 1809 peripheral munt tooling system
- Multiple tools can be mounted on a single station to increase tool capacity
- Wide range of optional BMT-45 tool holders are available from Hardinge featuring coolant nozzles or thru-tool coolant capabilities
- Powerful live tooling capability on all stations for radial and axial millingdrilling operations
- 5Hp (3.7Kw) power rating
- 17.5 ft-Ins (23.8Nm) torque rating
- 5000-rpm maximum speed
- Optional Live tooling attachments up to 20,000-rpm
- Standard Y axis on the top turret with helical interpolation function
- Rigid tapping capability, all spindles is standard
- Angular workpiece machining is easily accomplished using angular adjustable BMT-45 DIN 1809 live tooling attachments
- Digitally-controlled servo motors on all axes are superior for positioning accuracy and stiffness
- Fast rapid traverse rates on all axes provide for reduced non-cut time
- 24mmin on X, X2 and Y axes
- 40mmin on Z, Z2 and secondary spindle axes
- Powerful 3.6 Hp (2.78Kw) axis drive motors
8″ x 16″ New Hardinge Slant Bed CNC Lathe Model Talent TT51 Machine Options:
- Parts Removal System (Conveyor-Type)
- Gripper type system include which is extended in the machine envelope to remove parts from spindle two
- Conveyor is located outside the machining envelope to minimize chip and coolant contamination
- Finished work pieces are conveniently removed from the right end of the machine without interrupting machine cycle
- Parts Removal System (Through Secondary Spindle)
- Finished workpieces remain in the secondary spindle after cutoff
- Workpieces are pushed through the spindle by each succeeding cut off workpiece onto a guide channel that extends outside the machine enclosure
- Live Tooling Attachments
- Fast job turnaround (JIT)
- Use up to 16 cross and/or end-working attachments on each turret for drilling, milling and tapping operations
- Attachments permanently lubricated
- Speeds fully programmable clockwise or counter clockwise in 1-rpm increments
- 1-degree spindle orient included
- Tool Touch-Off System
- Reduces total setup time
- Two separate probes-one for each turret
- Four direction probe surfaces
- Audible and visual signals on probe contact
- No N/C programming involved in setup
- Detachable probe arm for convenient storage
- Part Present Detector (Secondary Spindle)
- Provided automatic detection of machine workpiece in the spindle
- Machine automatically shuts down during unmanned operations if part is not present
- Chip Conveyor
- Side discharge
- Automatic removal of chips from the machining area-reduced downtime for cleaning and maintenance
- Variable speed motor
- Ideal for unmanned operations
- Y Axis (Upper Turret Only)
- Provides precise, complex off-center milling and drilling operations
- Spindle Tooling
- Flex C collet system
- Collet Adaptation chucks available for a variety of collet type systems (16C/20C/B Style)
- 3 Jaw chuck systems
- Sure Grip expanding collets
- Dead length systems
- Thru-Spindle Air Blast (Secondary Spindle)
- Automatic removal of chips from the work holding device for cleaner gripping surface
- Thru-Spindle Coolant (Main or Secondary Spindle-Not Both)
- Coolant is fed through the spindle from the coolant system to flush chips from spindle and gripping surfaces
- Lower cycle times/better production rates
- Additional Equipment Available
- Auto Door
- Coolant Chiller
- Bar Feed Systems
- Power Transformers
- Stack Light
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.
