Description
14” x 40” New Clausing Lathe C14 Geared Head Straight Bed Model C1440SJ Features:
- Geared Headstock, 2 Speed Motor, and Control Panel: The 14” Clausing Lathe has a drive motor that drives a fully geared heavy-duty headstock giving you a total of 16 spindle speeds. All gears are hardened and ground and run in a continual bath of oil. The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The easy-to-operate control panel is designed for efficiency. (33/70/45/110/140/165/220/225/330/415/450/665/830/1000/1330/2000 RPM)
- Variable Speed 2 Gear Headstock and Control Panel (VS Models): The 14″ VS Clausing Lathe with Yaskawa Inverter has a two range headstock giving you a wide selection of variable speeds. All gears are hardened and ground and run in a continual bath of oil. The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The easy-to-operate control panel is designed for efficiency.
- Spindle Brake foot brake system for spindle braking control.
- Full Length Splash Guard: A standard feature on the 14” lathe, for clean work environment.
- Carriage & Apron: Controls are designed for easy operation to ensure maximum productivity. Easy-to-read inch dials, a 4-way tool post, and thread dial are standard equipment on the 14” lathe.
- Chuck Safety Guard and Traveling Chip Guard: For safe operation of the lathe and CE safety marking.
- Bed & Bedways: The extra-wide scientifically designed bed, with tapered cross braces for fast and easy chip removal, is constructed of stabilized cast iron with bedways hardened of 42 to 47 Rc. The bed is mounted on a rigid, fabricated steel base that is specially engineered to absorb vibration and ensure smooth, accurate operation.
- Tailstock: A heavy-duty casting design with 2” quill for maximum rigidity to support work pieces or tooling.
Specifications:
Capacity | |
Swing over bed | 14.25” |
Center height | 7.1” |
Swing in gap | 22” |
Gap length in front of faceplate | 6” |
Swing over cross slide | 8.265” |
Bed width | 10” |
Center distance | 30” / 40″ |
Headstock | |
Spindle bore | 1.625” |
Spindle nose | D1-5 |
Spindle taper / Bushing taper | 3MT/5MT |
No. spindle speeds geared drive | 16 |
Spindle speed (rpm) geared drive | 33-2000 |
No. spindle speeds variable drive | 2 |
Spindle speed variable drive | 35-2500 |
Thread and Feed Box | |
No. of longitudinal feeds | 24 |
Range (inches) | 0.0012-0.016 |
No. of cross feeds | 24 |
Range (inches) | 0.0004-0.0053 |
No of metric threads | 27 |
Range (mm) | 0.4-7 |
No. of inch threads | 36 |
Range (TPI) | 4-72 |
No. of modular threads | 18 |
Range (mm) | 0.3-3.5 |
No. of diametral pitch threads | 21 |
Range (DP) | 8-44 |
Leadscrew dia./TPI | 1.26”/4 |
Slide and Carriage | |
Cross slide travel | 7.6″ |
Cross slide width | 5.9” |
Compound travel | 4” |
Compound width | 4.01” |
Max. tool size w/ 4-way tool post | ¾” x ¾” |
Tailstock | |
Tailstock quill diameter | 2” |
Tailstock quill travel | 4.75” |
Tailstock taper | 3MT |
Motors | |
Spindle motor (GH & VS) (Hp) | 5 |
Optional 2SP spindle motor (GH) (Hp) | 5/3 |
Coolant pump motor (Hp) | 1/8 |
Dimensions Machine | |
Machine height | 50” |
Machine width | 35” |
Machine length 30″/40″ | 63″/74″ |
Machine weight 30″/40″ | 1,870 lbs/1,980 lbs |
Dimensions Shipping | |
Height | 66″ |
Width | 36″ |
Length 30″/40″ | 71″/81″ |
Weight 30″/40″ | 2,200 lbs/2,420 lbs |
14” x 40” New Clausing Lathe C14 Geared Head Straight Bed Model C1440SJ Equipment:
- Inch Dials
- Dead Centers
- 4-Way Tool Post
- Coolant System
- One-Shot Lubrication
- Interlocking Chuck Guard
- 7” 3-Jaw Chuck SK
- Steady Rest w/ Rollers .39” to 4.9” Capacity
- 5-Position Turret Type w/Micrometer Bed Stop
- Splash Guard
- Leadscrew Cover
- Thread Dial Indicator
- T-Slotted Top Slide
- Foot Brake Geared Head and Variable Speed Headstock
- Chip Pan
- Chip Guard
- Halogen Work Light
- CE Electrics
- Tool Box and Manual
Standard Voltage is 230/3/60 Volt. Other voltages may require a transformer or special order.
Optional Equipment:
Spindle Options | |
J14-55A Magnetic Brake System with Chip Trolley No Foot Brake (factory) | $2,060.00 |
Work Holding Options | |
J14-02 Follower Rest w/Roller Tip Fingers .39” to 4.3” | $705.00 |
J14-02A Follower Rest w/Bronze Tip Fingers .39″ to 4.3″ | $580.00 |
J14-13 Extra Steady Rest w/Rollers .39” to 4.9” Capacity | $950.00 |
J14-13A Steady Rest w/Bronze Tips .39” to 4.9” Capacity | $765.00 |
Tool Post Options | |
ALORIS QUICK CHANGE VERSION | |
J14-05A Aloris CXA Tool Post w/4 Holders (2 sided) | $1,320.00 |
13-775A-1 Aloris Extra Straight Holder 3/4” (CXA) | $135.00 |
13-775A-1S Aloris Extra Straight Holder 1” (CXA) | $195.00 |
13-775A-2 Aloris Extra V-Holder 3/4”, 3/4″ bore bar (CXA) | $145.00 |
13-775A-2S Aloris Extra V-Holder 1, 3/4″ bore bar (CXA) | $200.00 |
13-775A-4 Aloris 1″ Heavy Duty Boring Bar Holder | $245.00 |
13-775A-4D Aloris 1″ Boring Bar Holder | $190.00 |
13-775A-41D Aloris 1-1/4″ Boring Bar Holder | $205.00 |
13-775A-5 Aloris Extra 3MT Holder (CXA) | $190.00 |
13-775A-54 Aloris Extra 4MT Holder (CXA) | $215.00 |
13-775A-10 Knurling Q/C Holder w/Med Diamond Blades 9CXA) | $255.00 |
13-775A-10AMS Straight Knurling Tool AC25 Req 2Ea (13-775A-10) | $50.00 |
13-775A-71 Aloris Extra Cutoff Holder 1.5″ height (CXA) | $360.00 |
3-503A-BSL125 Aloris 1/8” Cutoff Blade | $105.00 |
Chucking Options | |
J14-01 12” Face Plate D1-5 | $545.00 |
0625322 6” 3-Jaw Setrite Universal Scroll Steel Chuck | $1,570.00 |
0825322 8” 3-Jaw Setrite Universal Scroll Steel Chuck | $1,830.00 |
0626322 6” 6-Jaw Setrite Universal Scroll Steel Chuck | $1,820.00 |
0826322 8” 6-Jaw Setrite Universal Scroll Steel Chuck | $2,735.00 |
0814422 8” 4-Jaw Independent Ductile Iron Chuck | $1,475.00 |
1014422 10” 4-Jaw Independent Ductile Iron Chuck | $1,700.00 |
PB23-D5 PBA Front Mounted Handwheel 5C Collet Chuck | $1,550.00 |
0123-R-(state size) Individual 5C Round Collet Inch | $30.00 |
0123-R-(state size) Individual 5C Round Collet Metric | $30.00 |
0123-SET-4 1/16″-1 1/16″ by 64ths (inch set) | $1,850.00 |
0123-SET-5 1/16″-1 1/16″ by 32nds (inch set) | $960.00 |
0123-SET-6 1/16″-1 1/16″ by 16ths (inch set) | $500.00 |
0123-SET-7 1/8″-1″ by 8ths (inch set) | $235.00 |
0123-SET-1 3mm-27mm by .5mm (metric set) | $1,400.00 |
0123-SET-2 3mm-27mm by 1mm (metric set) | $725.00 |
7659 18pc 5C Collet Rack | $55.00 |
Tailstock Options | |
12-510 Live Center | $405.00 |
1897 Drill Chuck for Tailstock | $165.00 |
1898 3MT to 3JT Arbor for 1897 | $25.00 |
Miscellaneous Options | |
J14-06 Taper Attachment | $1,600.00 |
J14-06 Taper Installation | $350.00 |
DRO | |
AR10M40100T 2 Axis Acu-Rite 100 DRO | $2,800.00 |
AR10M40200T 2 Axis Acu-Rite 200 DRO | $3,030.00 |
AR10M40300T 2 Axis Acu-Rite 300 DRO | $3,515.00 |
AR10M40300TTHD 2 Axis Acu-Rite 300 DRO w/Thread Assist | $4,550.00 |
FG0840-PK 2 Axis Fagor LED DRO | $2,800.00 |
FG0840-PKC 2 Axis Fagor Color DRO | $3,030.00 |
NW0840NMS800 2 Axis Newall NMS800 LED DRO | $3,100.00 |
Installation of 2 Axis System | $500.00 |
Installation of 2 Axis w/Threading System | $650.00 |
Installation of Taper Attachment | $350.00 |
Clausing Warranty:
Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.