Description
9″ x 49″ New U.S. Industrial Machinery Manual Variable Speed Vertical Milling Machine Model 2VH-3 Specifications:
Working Surface | 9″ x 49″ |
Longitudinal Travel (X-axis) | 29″ with powerfeed (33″ without powerfeed) (Powerfeed stops prevent over travel) |
Cross Travel (Y-axis) | 12″ (11″ without readout installed) |
Vertical Travel (Z axis) | 15.74″ |
Ram Travel | 12″ |
Head tilt, left to right | 90 degrees left, 90 degrees right with degree ring scale |
Head tilt, front to back | 45 degrees front, 45 degrees back with degree ring scale |
Ram Circular Movement | 360 Degree with degree ring scale |
T-Slots | 3 with 2-1/2″ centers, 5/8″ each |
Spindle Drive | 3 HP |
Spindle Range (Manual Vari-speed sheeve) | 60-4200 Variable with Direct Drive and Back-geared |
Spindle Type | R-8 |
Quill Travel & Diameter | 5″ travel and 3-3/8″ diameter |
Power quill feed range, Inches per rev | 0.0018″, 0.003″, 0.006″ |
Weight of Work Piece, max | 500 lbs |
Spindle Motor | 3 HP, 208-240 volt or 440/460/480 volt, 3 phase spindle motor motor-standard |
Electrics | 208-240V or 440/460/480V, 3 phase – pick one |
Machine, Net Weight | 2,550 lbs |
9″ x 49″ New U.S. Industrial Machinery Manual Variable Speed Vertical Milling Machine Model 2VH-3 Standard Equipment:
- 9” x 49” table with 3 T-slots, 5/8”, on 2.5” centers Table travel is 33”. Leadscrew pitch is 5TPI with dials on each end graduated in .001”
- Travel of cross feed is 12” with .001” dial graduations
- Knee travel is 15.74” with 10TPI leadscrew, .001” dial graduations
- Ram allows for over 12” of travel, for variable throat depth
- Conventional dovetail ways on X, Y and Z Axis…………. Double locks on all axis
- Aged stressed castings, stress relieved for long life and accuracy, Meehanite type
- Power quill feed allows for 0.0018, 0.003, 0.006 Inches of feed per revolution of spindle
- Hardened and ground and precisely scraped work table, saddle and knee ways
- Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews
- Backlash adjustment for leadscrews, Gib adjustments for ways
- Electrical cabinet with internal transformer for 110V and 24V devices, circuit breaker protected, Low Voltage controls, 24 volt halogen machine light. Transformer also includes power supply for digital readout and power table feed.
- Operator low voltage controls for coolant pump, machine light, main power with emergency stop button. Spindle off/forward/reverse switch.
- Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve, Installed and ready to use. Base chip pan to help prevent coolant overflow.
- Manual variable speed spindle drive, 3 Horsepower runs the spindle from 60 to 4200 RPM. Spindle speed dial on head shows RPM in direct drive and back gear. Spindle motor is finned for cooling.
- Sino three axis digital readout has 0.0002” resolution. Readout comes mounted to knee, table and cross and is ready to use. The readout is inch/metric switchable, with absolute incremental function. There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function. A comprehensive manual is included.
- Power table feed is Align model AL500SP. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops. This heavy duty power feed has 150 inch pounds of torque, with max to 650. Power table feed comes installed on machine, ready to use.
- Toolbox and tools, manuals, electrical drawing, test certificate all included.
9″ x 49″ New U.S. Industrial Machinery Manual Variable Speed Vertical Milling Machine Model 2VH-3 Optional Equipment:
AL500SP Heavy duty power table feed on X axis | Included |
FCKIT Flood coolant pump, hose, nozzle | Included |
CPKIT Chip pan | Included |
MLKIT Machine light | Included |
FRWCKIT Front and Rear way covers | Included |
SINO3AX Three axis digital readout | Included |
PDB-PB001 Air Power Drawbar, pneumatic, installed | $895.00 |
Y150-3V Bestline Power Feed for Y-axis (cross feed) | $760.00 |
Z150-3V Bestline Power Feed for Z-axis (knee feed) | $840.00 |
R8ER32KIT-K Mill QC collet set, 1 holder R-8 to ER32, 1 spanner for collet nut, 11 ER32 collets from 1/8″ to 3/4″, all in form fitted case | $299.00 |
CK-K Clamp kit, 58 piece, bolts, nuts, step blocks, fingers, for fixturing | $119.00 |
P100-K Precision Parallel Set, several matched parallels in form case | $169.00 |
6″VISE-K Milling vise, 6″ lock type | $299.00 |
R8-SET R-8 collet set, 11 pieces | $139.00 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.