Description
15” x 25” New Clausing VS Gap Bed Lathe Model 8041VSJ Features:
- AC Inverter Variable Speed Spindle Drive state of the art AC Spindle Drive featuring surface mount technology to give compact size and high reliability….4 years parts and labor warranty on drive
- 24V Control: The machine controls are 24V for low voltage requirements
- Interlocked End Guard Door with easy access for maintenance and changing end train gears
- Leadscrew Reversing Box for faster thread cutting – reversal of the Leadscrew with the spindle running at low speed
- Easy to read Index Plate makes it simple to select the proper feed rate or threads
- Three Headstock Gear Ranges for a wide spread of constant power – 33 to 1 – better than most CNC lathes
- Infinitely Variable Spindle Speeds you can get the right spindle speed very quickly with a response like a CNC lathe, displayed on headstock
- Electromagnetic Spindle Brake
- Forced lubrication system the spindle bearings, gears and shafts are lubricated by a forced lubrication system
- Precision Tapered Roller Spindle Bearings
- Chuck Guard with limit switch
- Anti-Friction Carriage Ways. Low-friction “Moglice” PTFE material between the saddle and bed for minimal bed wear and longer machine life
- Saddle Mounted Chip Guard and Full Rear Splash Guard
- Extra Wide Heavy-duty Cast Iron Bed with triangular webs for exceptional torsional stiffness and excellent chip clearance
- Heavy Duty Tailstock for excellent rigidity – with extra heavy-duty quill
- Covered Leadscrew protects leadscrew from chips
- Wheeled Chip Bin has a large capacity for easy chip disposal
- Hardened and Ground Bedways – all bed ways are induction hardened and precision ground
- Cast Iron Base provides the maximum support for the bed combined with sloping top surfaces to prevent the accumulation of coolant
15” x 25” New Clausing VS Gap Bed Lathe Model 8041VSJ Specifications:
| Capacity | |
| Height of center | 7.67″ |
| Swing over bed | 15.75″ |
| Swing in gap | 23″ |
| Width in front of faceplate | 6.5″ |
| Swing over cross slide | 9.7″ |
| Bedway width | 12.5″ |
| Headstock | |
| Sindle bore | 2.12″ |
| Spindle nose (cam lock) | DI-6 |
| Spindle nose taper | 4MT |
| Number of spindle speeds | 3 infinitely variable |
| Spindle Speed Range (rpm) | 15-2500 |
| Low range (rpm) | 15-300 |
| Mid range (rpm) | 35-830 |
| High range (rpm) | 110-2500 |
| Cross/Top Slide | |
| Travel of cross slide | 9.8″ |
| Width of cross slide | 7.09″ |
| Travel of top slide | 5.1″ |
| Width of top slide | 3.93″ |
| Tailstock | |
| Quill travel | 5.5″ |
| Quill Diameter | 2.87″ |
| Quill taper | 5MT |
| Feeds & Threading | |
| ¬longitudinal feed range | 0.0014″ -0.048″ |
| Cross feed range | 0.0007″-.024″ |
| Number of inch pitches | 56 |
| Range of pitches | 2-56TPI |
| Number of metric pitches | 51 |
| Range of metric pitches | 0.2-14mm |
| Number of diametral pitches | 20 |
| Range of diametral pitches | 8-56 |
| Number of module pitches | 20 |
| Range of module pitches | 0.2-3.5 |
| Motor | |
| Spindle motor | 10 hp |
| 8041 Dimensions | |
| Swing & Center Distance | 15″ x 25″ |
| Length x Height x Width | 75″ x 63″ x 44″ |
| Weight approx. | 2,970 lbs |
15” x 25” New Clausing VS Gap Bed Lathe Model 8041VSJ Standard Features:
- Spindle Center Bushing
- Two MT Dead Centers
- Splash Guard
- Chuck Guard
- Leadscrew Cover
- Coolant System
- Inch Threading Dial
- Set of Wrenches and Keys
- Instruction and Parts Manual
- Accuracy Chart
- Emergency Stop Button
- Lockable Isolator Switch
- One Shot Saddle and Cross Slide Lubrication
- Forward/Reverse/Stop Switch
- Standard 230/3/60 or 460/3/60 Volts (208/3/60 volts Require a Transformer)
Optional Equipment:
| 13-41VS | 12″ Telescopic Taper Attachment | $2,860.00 |
| 15-703 | 14″ Clotted Face Plates | $1,220.00 |
| 15-704 | 21″ Slotted Face Plates | $2,420.00 |
| 17-910 | Live Center | $980.00 |
| 15-600N | Drive Plates | $815.00 |
| 15-722N | Bronze Tip & Roller Steady Rest 3/8″ to 6-3/8″ | $1,600.00 |
| 15-754N | Bronze Tip & Roller Follower Rest 3/8″ to 3-1/4″ | $860.00 |
| PB23-D6 | 5C Ft. Mount Handwheel Collet Chuck | $1,575.00 |
| 0123-R (size) | Individual 5C Round Collet Inch | $30.00 |
| Individual 5C Round Collet Metric | $30.00 | |
| 0123-SET-4 | 1/16″ – 1-1/16″ by 64ths (inch set) | $1,850.00 |
| 0123-SET-5 | 1/16″ – 1-1/16″ by 32nds (inch set) | $960.00 |
| 0123-SET-6 | 1/16″ – 1-1/16″ by 16ths (inch set) | $500.00 |
| 0123-SET-7 | 1/16″ – 1-1/16″ by 8ths (inch set) | $235.00 |
| 0123-SET-1 | 3mm – 27mm by .5mm (metric set) | $235.00 |
| 0123-SET-2 | 3mm – 27mm by 1mm (metric set) | $725.00 |
| 7659 | 18 pc 5C Collet Rack | $55.00 |
| 15-775A | Aloris Quick Change Tool Post w/4 Holders (CA) | $1,545.00 |
| 15-775A-1 | Aloris Extra Straight Holder 1″ (CA) | $160.00 |
| 15-775A-1S | Aloris Extra Straight Holder 1-1/4″ (CCA) | $235.00 |
| 15-775A-2 | Aloris Extra v-Holder 1″, 13/16″ bore bar (CA) | $175.00 |
| 15-775A-2S | Aloris Extra V-Holder 1-1/4″, 1″ bore bar (CA) | $250.00 |
| 15-775A-4 | Aloris 1-1/4″ Heavy Duty Boring Bar Holder (CA) | $290.00 |
| 15-775A-4D | Aloris 1-1/4″ Boring Bar Holder (CA) | $230.00 |
| 15-775A-41D | Aloris 1-1/2″ Boring Bar Holder (CA) | $265.00 |
| 15-775A-5 | Aloris Extra 3MT Holder (CA) | $220.00 |
| 15-775!-54 | Aloris Extra 4MT Holder (CA) | $250.00 |
| 15-775A-71 | Aloris Extra Cutoff Holder 2″ height (CA) | $375.00 |
| 15-775A-BSL187 | Aloris Cutoff Blades Self-Locking Throw Away 3/16″ (CA) | $135.00 |
| 13-438VS | Five-Position Carriage Stop – Requires One Position or Micro Carriage Stop – Sold Separately | $775.00 |
| 13-435VS | One-Position Carriage Stop | $495.00 |
| 13-436VS | Micro Position Carriage Stop | $1,140.00 |
| 15-AVP | Set of 8 Anti-Vibration Pads | $1,015.00 |
| 0825323 | 8″ 3-Jaw Setrite Universal Scroll Chuck | $1,830.00 |
| 1025323 | 10″ 3-Jaw Setrite Universal Scroll Chuck | $2,290.00 |
| 0826323 | 8″ 6-Jaw Setrite Universal Scroll Chuck | $2,735.00 |
| 1026323 | 10″ 6-Jaw Setrite Universal Scroll Chuck | $3,310.00 |
| 1014423 | 10″ 4-Jaw Independent Chuck | $1,700.00 |
| 1214423 | 12″ 4-Jaw Independent Chuck | $2,025.00 |
| 1897 | Drill Chuck for Tailstock | $165.00 |
| 7327 | 5MT to 3JT Arbor for 1897 | $120.00 |
| AR10M28100T | 2 Axis Acu-Rite 100 DRO | $2,535.00 |
| AR10M28200T | 2 Axis Acu-Rite 200 DRO | $2,815.00 |
| AR10M28300T | 2 Axis Acu-Rite 300 DRO | $3,295.00 |
| AR8016CS | 2 Axis Acu-Rite 300 DRO w/CSS Control | $3,925.00 |
| AR10M28300TTHD | 2 Axis Acu-Rite 300 DRO w/Thread Assist | $4,325.00 |
| AR8016300CSTHD | 2 Axis Acu-rite 300 DRO w/CSS & Thread Assist | $4,950.00 |
| FG1028-PKC | 2 Axis Fagor Color DRO | $2,815.00 |
| FG1028-PK | 2 Axis Fagor LED DRO | $2,585.00 |
| NW1026NMS800 | 2 Axis Newall NMS800 LED DRO | $3,100.00 |
| CLAUS3-A12K | 12KVA 460 Volt to 230 Volt Transformer | $2,195.00 |
| CLAUS3-A12K-575 | 12KVA 575 Volt to 230 Volt Transformer | $2,195.00 |
| CLAUS2-A12K | 12KVA 208 Volt to 230 Volt Transformer | $1,525.00 |
| Installation of 2 Axis System | $450.00 | |
| Installation of 2 Axis CSS System | $600.00 | |
| installation of 2 Axis w/Threading | $600.00 | |
| Installation of 2 Axis w/Threading & CSS System | $750.00 | |
| installation of Taper Attachment | $300.00 |
Note: All Variable Speed Lathes are 230v or 460v
(Note: Transformer may be required for 460 depending on stock availability.) If 208v or 575v is required, a transformer must be purchased.
Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/
Reviews
There are no reviews yet.