16″ x 40″ New Sharp Lathe Model 1640LV-K

Price On Request
F.O.B. Factory
Terms:  Check with Order


SKU: 30903 Categories: , Tag:


This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows most 3” diameter oil pipes to be machined. The variable speed spindle allows easy change of speeds.

16″ x 40″ New Sharp Lathe Model 1640LV-K Specifications:

Swing Over Bed 16″
Swing Over Cross Slide 8-3/4″
Swing Over Gap 24-3/8″
Travel of Cross Slide 9-1/2″
Width of Gap 9-3/4″
Center Height from Top of Compound 1.9″
Distance Between Centers 40″
Spindle Nose Type D1-8 camlock
Spindle Bore 3-1/6″
Spindle Speeds (12) 20 – 2,000 rpm
Taper of Spindle Bore MT #6
Taper of Center MT #4
Longitudinal Feeds – in/rev (18) 0.002 – 0.032″ 
Cross Feeds – in/rev (#) 0.0001 – 0.0094″ (12)
Inch Threads (#) 4 – 56 tpi (36)
Metric and Module Threads (#) 0.5 – 7mm (17)
D.P. Threads (36) 4 – 56mm
Leadscrew Pitch, Diameter 4 tpi, 1-3/8″
Cross Slide Width 8.7″
Compound Rest Travel 4.9″
Compound Width 4.5″
Bed Length 59″
Bed Width 11-3/4″
Quill Travel (graduated) 5″
Quill Diameter 2-1/4″
Quill Taper MT #4
Spindle Motor (220V or 440V, 60, 3) 7-1/2 HP
Net Weight (approx.) 3,600 lbs
Standard Color Gray
Voltage 230V & 460V-requires additional transformer
Phase 3 phase
230V 8 KVA/25 amps
460V 8 KVA/12.5 amps

16″ x 40″ New Sharp Lathe Model 1640LV-K Features:

  • D1-8 camlock, 3″ hole
  • Direct selection for inch/metric threads
  • One piece case Meehanite bed
  • 7-1/2 HP spindle motor
  • Digital variable speed (DVS) on “LV” models
  • “LV” models wired at 220V only.  440V requires optional transformer. Please specify.

16″ x 40″ New Sharp Lathe Model 1640LV-K Standard Accessories:

  • 3-jaw 10″ chuck
  • Face plate (16″)
  • Steady rest (1/2″ – 6″)
  • Follow rest
  • Coolant system
  • Full length splash guard
  • American tool post
  • Halogen work light
  • Newall NMS 300, 2 axes DRO
  • Chuck guard with limited switch
  • Longitudinal carriage stop
  • Center sleeve (MT 5 x 3)
  • Dead centers (MT #4 x1, MT #5 x1)
  • Tailstock
  • Machine is set only for 220V. Needs an optional transformer for other applications.
  • Tool kit includes: Machine manual, half nut wrench, 17m and 19m wrenches, set of 6 Allen wrenches, Phillips-head screw driver, flat head screw driver, oil can, grease gun, rear way cover bracket, 2 sets of dead center, pin for indicator, can of paint

16″ x 40″ New Sharp Lathe Model 1640LV-K Optional Accessories:

3J12D8 add  3-jaw 12″ chuck (QU) in lieu of the 3-jaw 10″ (standard equipment) $285.00
3J12D8  3-jaw 12″ chuck (QU)  $1,115.00
4J12D8  4-jaw chuck 12″ (QU) $1,055.00
803-1038  3-jaw chuck 10″ (Bison) $1,760.00
803-1238  3-jaw chuck 12″ (Bison) $2,710.00
853-1238  4-jaw chuck 12″ (Bison) $1,890.00
18C-01  Chuck guard (factory order only) $670.00 (installed)
TG 16 L  Tool guard (factor order only) $1,545.00
LSG-1640 L  Lead screw guard (factory order only) $1,230.00
GBS-16L  Guard behind spindle (factory order only) $50.00
UL/CSA-16  UL/CSA switch board/UL motor/CSA pump in lieu of regular version (factory order only) $1,280.00
UL compliance certificate issued by CSA Group in Los Angeles with:
1. Chuck guard (18C-01)
2. Tool guard (TG 16 L)
3. Lead screw guard (LSG-1640 L)
4. Guard behind spindle (GBS-16L)
5. UL/CSA switch board/UL motor/CSA pump in lieu of regular version (UL/CSA-16) 
18C-02  Micrometer carriage stop $185.00
18C-05  4-way tool post for 16″ swing lathe $1,135.00 (installed)
18C-03  Taper attachment (factory installed) $2,830.00
18C-04  Roller jaws for steady rest $525.00
16C-01  (Extra) Steady rest 16″ for lathes (1/2-6″ capacity) $650.00
16C-09  Steady rest for 16″ lathes (4-9″ capacity) $1,290.00
16/18-D/A  Drill & arbor (JACOBS) $430.00
CXA-2511-7250  Quick change tool (7 pcs) holder set (Aloris) $2,295.00
10854  Live center – Royal (dual bearing) MT#4 $420.00
LC-MT4  Live center – MT#4 $200.00
ACC-5C  5C collet set (1/8″ to 1-1/16″ by 1/16″) 16 pcs $450.00
CCD1-8  5C collet closer set for 16/18″ lathe (Atlas) $2,050.00
440 T 10  575V transformer, please select $1,340.00
MTR 16/18L-10HP  10 HP motor in lieu of 7.5 HP with inverter $2,500.00


About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/