15” x 20” New Amada Vertical Tilt Frame Band Saw Model VT3850A (380APC) – USA Made!

Terms: Check with Order


SKU: 33246 Categories: , ,


The 15” x 20” New Amada Vertical Tilt Frame Band Saw Model VT3850A features 5 H.P. Automatic Indexing, ± 60° Miter Hydraulic Metal Cutting High-Speed Bandsaw with a Programmable Control and Direct Force Sensing Electric Ball Screw Feed. 

15” x 20” New Amada Vertical Tilt Frame Band Saw Model VT3850A (380APC) Specifications:

Cutting Capacity (Standard Column with 3° Forward Cant)  
Round 0° (diameter)
Round at 45° right (diameter)
Round at 45° left (diameter)
Round at 60° right (diameter)
Round at 60° left (diameter)
Rectangle at 0° (W x H)
14.5″ x 20″ 
Rectangle at 45° right (W x H)
14.5″ x 13.5″
Rectangle at 45° left (W x H)
14.5″ x 12.75″
Rectangle at 60° right (W x H)
14.5″ x 8.75″
Rectangle at 60° left (W x H)
14.5″ x 7.75″
Maximum vise opening
Work load capacity
1,000 lbs
Saw Blade
Blade size (L x T x W)
16′ x 0.042″ x 1-1/4″
Blade speed
60-400ft/min by Inverter
Tension control
Blade Control
Cutting control
Direct Force Sensing Electric Ball Screw with PC3 Programmable Control
Blade feed force
0 to 300 lbs
Vise Operation
Main Vise (Optional second vise is available to install)
Hydraulic, Half Stroking with 6.7″ High x 11.4″ Wide 60° Faceplates
Saw blade
5 HP
Hydraulic pump
2 HP
Cutting fluid pump
1/8 HP
Tilt gear
1/15 HP
Power Requirement
Power supply voltage
AC230V +- 10% or AC460V +- 10%
3PH, 60 Hz, voltage must be specified when ordering
Power requirement
Cutting Fluid
Tank capacity
26 gal
Pump type
Tank capacity
14 gal
Pressure setting
725 psi
Chip disposal
Chip conveyor
Standard Feed Vise
Index mechanism
Shuttle vise
Material index
VT3850A: Double Ball Screw by Electrically Driven
VT3850S: AC Servo Motor with Double Ball Screw
Feed stroke
Remnant Length
19″ plus length of parts
Machine dimensions (W x L x H)
158.3″ x 111.8″ x 93.7″
Table Height (Above Floor)
Machine Weight
5,900 lbs


15” x 20” New Amada Vertical Tilt Frame Band Saw Model VT3850A (380APC) Features:

  • SPEED RANGE: 60 – 400 fpm (18 – 122 m/min), blade speed can be automatically set when material is selected
  • TILTING COLUMN: For miter cutting up to 60° left and right of vertical. Variable speed, inverter driven, electronic tilt- Includes encoder feedback and touch screen display & control, for precision miter positioning. Electrically powered with encoder feedback and PC3 Controller
  • 0° – 3° CANTED COLUMN: Adjustable 0 or 3-degree forward approach angle, for notching, or increased efficiency in cutting of structural materials. Capacity at 0° 15″ x 20″. Capacity at 3° 14.5″ x 20″
  • JAMMED BLADE PROTECTION: Automatically senses resistance as the column returns and stops to prevent blade damage
  • BLADE GUIDE: Patent pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning
  • FLUSHING HOSE: Washes chips from hard to get at places reducing clean-up time
  • VISES: Hydraulic 60° jaws are standard with Optional Variable Vise Pressure as well as square jaws
  • AUTOMATIC BAR FEED: Design features a 48” stroke length with indexing speeds of up to 70 ft./min
  • PC3 PROGRAMMABLE CONTROL®: Provides a Programmable Logic Control Unit with a 9” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library
  • AUTOMATIC BAR FEED: 48″ double ball screw bar feed design with following support rollers, shuttle speeds up to 70fpm and repeatability tolerances of +/- .005″. The VT3850 bar feed uses preloaded recirculating linear guides
  • EAGLE BEAK VTR BLADE: Eagle Beak VTR blade 16′ long x 1.25″ wide, with 3/6 tooth pitch. This is the standard blade that is included with machine purchase

15” x 20” New Amada Vertical Tilt Frame Band Saw Model VT3850A (380APC) Optional Accessories:

F3: Outboard Vise  
F12: Work Lift Roller  
SGA1: Smart Guide Arm  
F4: Second Machine Vise  
M9A: Variable Vise Pressure  
PC3SBN: Bullet Nose Feature  
F055L: Dead Roller Conveyors  
M4A: Opposite Hand Work Entry  
M8M/M8: Chip Conveyor – Manual or Powered  
F8/F8A: Hydraulic Hold Downs – Machine/Shuttle  


About Us

Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs. 

We buy and sell new and used ironworkersshearslathesmilling machinesdrillssawspress brakesroutersturret punch modelspresses, welders, deburring and beveling machinesplate rollslaserwaterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A QuoteCall 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference. 

Check us out on TwitterFacebookYoutube, and Instagram.

Worldwide Machine Tool LLC.

Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/

All product information including but not limited to price, specifications, color, photos, equipped with and features are subject to change.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.