18″ x 22″ New Amada Vertical Tilt Frame Band Saw Model VT4555 (8-Mark-II)

Product

Short Description

Product Description

Marvel Classic

Color Scheme

Also available in “Marvel Classic” color scheme for additional charge (see options sheet).

Warranty

1-Year additional

One-year additional parts warranty

M6

High Column

Column 6” (150 mm) longer than standard, providing increased vertical capacity to 28” (712 mm) at vertical position and 17” high at 45 degrees.  High frame machines require a 15’ 6” (4724 mm) blade.

E4

Second Standard Vise

set including 6” high x 12” wide (152 mm x 305 mm) jaws and clamping hardware.  PERMITS MITER CUTTING.

M7

High Jaws

10” high x 12” wide (254 mm x 305 mm) in place of standard jaws provided with machine.  Jaws use same clamping hardware provided with machine. DO NOT PERMIT MITER CUTTING.

M8

45° High Jaws

In place of standard jaws provided with machine.  Jaws use same clamping hardware provided with machine.  One Front Jaw and one Rear Jaw, both mitered 45°, 10” high x 12” wide.

E5

High Jaw Vise- Complete

High jaw set including 10” high x 12” wide (542 mm x 305 mm) jaws and clamping hardware.  DOES NOT PERMIT MITER CUTTING.

E6

High Jaws – Jaws Only

10” high x 12” wide (254 mm x 305 mm).  Will interchange with standard 6” high x 12” wide (152 mm x 305 mm). Jaws use same clamping hardware provided with machine.  DO NOT PERMIT MITER CUTTING.

E15

45° High Jaw Vise – COMPLETE

includes one Front Jaw and one Rear Jaw, both mitered 45°, 10” high x 12” wide (254 mm x 305 mm) and clamping hardware.  PERMITS MITER CUTTING.

E16

45° High Jaws Only

Includes one Front Jaw and one Rear Jaw, both mitered 45°, 10” high x 12” wide (254 mm x 305 mm) for use where machine is already equipped with clamping hardware. PERMITS MITER CUTTING.

E14

Air Powered Vise

Only for use with standard or high jaw vise supplied with machine. This can be used in place of the standard hand crank ratchet nut. (Requires compressed air connection.)

M9A

Variable Vise Pressure

Controls and connections added to enable the machine to operate with air controlled variable vise pressure for one or two vises and utilizes the optional E14 (sold separately) air operated ratchet nut. PN: (8AB01288)

M17V

3° Canted Column (Standard Column)

Modification of standard column to add 3° forward approach angle, for increased efficiency in cutting of structural materials. Changes horizontal capacity to 17”.

M17HV

3° Canted Column (High Column)

Modification of standard High Column to add 3° forward approach angle, for increased efficiency in cutting of structural materials. _Note: Changes horizontal capacity to 16.75”.

SP2083

Optional High-Speed Modification

120 – 1080 fpm (36 – 329 m/min); main motor changed to 10 H.P., totally enclosed, fan cooled. Only available in 460-3-60-volt machine order.

ML2

Mist Lube – Automatic

Drop Lubrication System. (Requires compressed air connection 60-120psi)

ED2210

Unist Coolube 2210

Unist Coolube 2210 is the cutting oil and lubricant that is shipped within your ML2 (Mist drop lubrication system).  It is formulated as a metal cutting oil and lubricant for metals, wood, rubber, and most plastics.  It is 100% natural, non-toxic, non-staining, and will not oxidize (become sticky or leave a residue).  Coolube 2210 cutting fluid does not contain any ingredients currently recognized as hazardous by OSHA, IARC or NIP.  Coolube 2210 machining oil will never cause dermatitis and is formulated from cosmetic grade raw materials, which makes it entirely worker and environmentally safe.  Coolube 2210 is a USDA certified biobased product.

E8

Length Gauge

For gauging work pieces from .062” to 10.5” (1.6 mm x 267 mm) long.  Fits T-slots in machine table.

8SP01337

Alignment Light Laser

Projector for quick spotting of the cut.

8/F055

First Section Dead Roller Conveyor

5’ 0” (1524 mm) LONG, with five ball bearing rollers, 2.5” (64 mm) diameter, spaced on 12” (305 mm) centers, two stands, one end stop, and mounting bracket.  Used as first section on either loading or discharge side of machine.

8/X055

Extension Dead Roller Conveyor

5’ 0” (1524 mm) LONG, five ball bearing rollers, 2.5” (64 mm) diameter, spaced on 12” (305 mm) centers, one stand, attached to an 8/F055, an SP1118, or another X055 for use on either loading or discharge side of machine to extend the length of the roller tables needed.

SP1118

First Section Dead Roller Conveyor Free Standing

5’ 0” (1524 mm) LONG, with five ball bearing rollers, 2.5” (64 mm) diameter, spaced on 12” centers, two stands, and one end stop. 

8/SP1040

First Section Dead Roller Conveyor with Manual Length Gauge

10’ 0” (3048 mm) LONG, ten ball bearing rollers, 2.5” (64 mm) diameter, spaced on 12” (305 mm) centers, includes Dead Stop, Tilting Type Gauge; manually operated. Runs along tape and rail fastened to front side of Roller Table.  Gauge can be locked in place for gauging and tilted out of the way to permit work passage. Indicate Left or Right configuration.

8/SP1097

Extension Dead Roller Conveyor with Gauge Rail

5’ 0” (1524 mm) LONG, five ball bearing rollers, 2.5” (64 mm) diameter, spaced on 12” (305 mm) centers, like X055, but also equipped with gauge rail and measuring tape extensions.  For use with and as an EXTENSION to SP1040. Indicate Left or Right configuration.

E10

Length Gauge

Manual light-duty length gauge.  Securely mounts on roller conveyor.  Gauging is limited by length of roller conveyor.

E11

Coolant Pan

Will fit F055 and X055 roller conveyors.  Collects and returns coolant back to machine.  Includes pan, V-trough, and hangers.

E12

Eccentric Lift Roller

May be mounted on roller conveyor for either load or discharge sides; manually operated to raise roller and material slightly above machine table.  Lift capacity 1,000 pounds.

E13

Additional Rollers

For added support, can be installed between standard rollers.

8SP011144

Remote Control Assembly

Provides a free-standing control pedestal with 6 feet of cable in place of the standard mounted controls.

575-3-60

VOLT OPTION

If ordering the 575-volt machine, it will be wired for 480-volt operation and a transformer will be provided with the machine. A qualified electrician will be needed to install the transformer between the power supply and the machine.

220-1-60

VOLT OPTION

A Phase-A-Matic phase converter is shipped with the machine and requires a qualified electrician to wire it at installation and a 40 AMP service is required. Price is net price FOB factory to all purchasers. (#8PE19902)